---
name: vivado-prj-create
description: 'DIRECT EXECUTION - Auto-create Vivado FPGA projects. Triggers: "create Vivado project", "Vivado工程", "FPGA project", "Xilinx project", "setup Vivado". When triggered, IMMEDIATELY execute Step 0 without listing skills or asking for confirmation.'
---

# Vivado Project TCL Generator

## AI ASSISTANT BEHAVIOR RULES (CRITICAL)

**When this skill is triggered, you MUST:**
1. **DO NOT** list available skills
2. **DO NOT** ask user "which skill do you want?"
3. **DO NOT** ask for confirmation before proceeding
4. **IMMEDIATELY** start with **Step 0: Check Vivado installation**
5. Follow the complete workflow without interruption

**Trigger Keywords:** "创建Vivado工程", "create Vivado project", "FPGA工程", "setup FPGA project", "Xilinx project", "Vivado TCL"

This skill helps you generate TCL scripts for automatically creating Xilinx Vivado FPGA projects on Windows. The generated TCL script can be sourced directly in Vivado to create a complete project with proper device configuration.

## How it works

1. **Check Vivado installation (Step 0)**
2. **Collect required information via interactive questions**
3. Generate a complete TCL script
4. Save the script to a file
5. Provide instructions for running it

## IMPORTANT: Vivado Installation Check (Step 0 - REQUIRED)

**Before asking any questions, you MUST first check if Vivado is installed at the default location.**

Use the Bash tool to check if the default Vivado installation path exists:

```bash
test -d "d:/Xilinx/Vivado/2018.1/bin" && echo "EXISTS" || echo "NOT_FOUND"
```

- If the result is `EXISTS`: Proceed to Step 1 (interactive questions)
- If the result is `NOT_FOUND`: **Stop and report error to the user:**

```
错误 / Error: Vivado 没有正确安装！

请确认 Vivado 已安装在默认路径: d:\Xilinx\Vivado\2018.1\bin\

Please ensure Vivado is installed at: d:\Xilinx\Vivado\2018.1\bin\
```

## IMPORTANT: Interactive Question Requirements

**After Vivado installation is confirmed, use the `AskUserQuestion` tool to collect the following required information.**

### Step 1: Ask for FPGA Device/Part Number (REQUIRED)

Use `AskUserQuestion` to let the user select their target FPGA device. Only these four devices are supported:

```javascript
AskUserQuestion({
  questions: [{
    question: "请选择你的FPGA器件型号 / Select your target FPGA device:",
    header: "FPGA Device",
    options: [
      { label: "xc7z100ffg900-2", description: "Zynq-7000, 用于3.0激励器 / 3.0 Exciter" },
      { label: "xc7z035ffg676-2", description: "Zynq-7000, 用于ipots" },
      { label: "xc7a200tfbg676-2", description: "Artix-7, EMV7.1 / SMOD 激励器" },
      { label: "xc7z020cfg400-2", description: "Zynq-7000, 用于RFSwitch" }
    ],
    multiSelect: false
  }]
})
```

**Note:** If you need other FPGA models, you must modify this skill file to add them.

### Step 2: Ask for Project Name

Ask the user for the project name. This can be done with a simple text prompt (no AskUserQuestion needed unless you want to provide preset options):

**Example prompts:**
- "请输入项目名称 / What would you like to name your project?"
- "项目名称 / Enter the project name"

## Zynq PS Configuration

**IMPORTANT**: Determine if the selected device is a Zynq series (device starts with `xc7z`).

- **Zynq devices** (xc7z100ffg900-2, xc7z035ffg676-2, xc7z020cfg400-2): **MUST** configure the Processing System (PS)
- **Artix-7 devices** (xc7a200tfbg676-2): No PS configuration needed

### Zynq Device PS Configurations

For Zynq devices, use the corresponding PS configuration from the reference TCL files in this skill directory:

| Device | Reference File | DDR Freq | FPGA0 Freq |
|--------|---------------|----------|------------|
| xc7z100ffg900-2 | emv9_atsc3_bd.tcl | 533.33 MHz | 250 MHz |
| xc7z035ffg676-2 | ipots_bd.tcl | 266.67 MHz | 50 MHz |
| xc7z020cfg400-2 | RF_switch_bd.tcl | 266.67 MHz | 50 MHz |

### PS Configuration Template for Zynq Devices

For Zynq devices, add the following Block Design creation with PS configuration to the TCL script:

```tcl
# =============================================================================
# Create Block Design with Zynq PS Configuration
# =============================================================================

# Create Block Design
set design_name "design_1"
create_bd_design $design_name

# Create Processing System instance
set processing_system7_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:processing_system7:5.5 processing_system7_0 ]

# Apply PS configuration based on device type
# {{PS_CONFIG_PROPERTIES}}

# Create interface ports
set DDR [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR ]
set FIXED_IO [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 FIXED_IO ]

# Connect interfaces
connect_bd_intf_net [get_bd_intf_pins processing_system7_0/DDR] [get_bd_intf_ports DDR]
connect_bd_intf_net [get_bd_intf_pins processing_system7_0/FIXED_IO] [get_bd_intf_ports FIXED_IO]

# Create and connect reset
set rst_ps7_0_50M [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 rst_ps7_0_50M ]
connect_bd_net [get_bd_pins processing_system7_0/FCLK_CLK0] [get_bd_pins rst_ps7_0_50M/slowest_sync_clk]
connect_bd_net [get_bd_pins processing_system7_0/FCLK_RESET0_N] [get_bd_pins rst_ps7_0_50M/ext_reset_in]

# Save Block Design
save_bd_design

# Make Block Design available
make_wrapper -files [get_files ${design_name}.bd] -top
add_files -norecurse {{PROJECT_NAME}}/{{PROJECT_NAME}}.srcs/sources_1/bd/${design_name}/hdl/${design_name}_wrapper.v
update_compile_order -fileset sources_1
```

### PS Configuration Properties by Device

Replace `{{PS_CONFIG_PROPERTIES}}` with the appropriate device configuration:

**For xc7z100ffg900-2 (3.0 Exciter):**
```tcl
set_property -dict [list \
   CONFIG.PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ {250} \
   CONFIG.PCW_FPGA0_PERIPHERAL_FREQMHZ {250} \
   CONFIG.PCW_FPGA_FCLK0_ENABLE {1} \
   CONFIG.PCW_UIPARAM_DDR_FREQ_MHZ {533.333333} \
   CONFIG.PCW_UIPARAM_DDR_PARTNO {MT41K256M16 RE-15E} \
   CONFIG.PCW_UIPARAM_DDR_DEVICE_CAPACITY {4096 MBits} \
   CONFIG.PCW_UIPARAM_DDR_SPEED_BIN {DDR3_1066F} \
   CONFIG.PCW_USE_M_AXI_GP0 {1} \
   CONFIG.PCW_EN_RST0_PORT {1} \
   CONFIG.PCW_EN_CLK0_PORT {1} \
] $processing_system7_0
```

**For xc7z035ffg676-2 (ipots):**
```tcl
set_property -dict [list \
   CONFIG.PCW_ACT_APU_PERIPHERAL_FREQMHZ {666.666687} \
   CONFIG.PCW_ACT_CAN_PERIPHERAL_FREQMHZ {10.000000} \
   CONFIG.PCW_ACT_DCI_PERIPHERAL_FREQMHZ {10.158730} \
   CONFIG.PCW_ACT_ENET0_PERIPHERAL_FREQMHZ {125.000000} \
   CONFIG.PCW_ACT_ENET1_PERIPHERAL_FREQMHZ {10.000000} \
   CONFIG.PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ {50.000000} \
   CONFIG.PCW_ACT_FPGA1_PERIPHERAL_FREQMHZ {10.000000} \
   CONFIG.PCW_ACT_FPGA2_PERIPHERAL_FREQMHZ {10.000000} \
   CONFIG.PCW_ACT_FPGA3_PERIPHERAL_FREQMHZ {10.000000} \
   CONFIG.PCW_ACT_PCAP_PERIPHERAL_FREQMHZ {200.000000} \
   CONFIG.PCW_ACT_QSPI_PERIPHERAL_FREQMHZ {200.000000} \
   CONFIG.PCW_ACT_SDIO_PERIPHERAL_FREQMHZ {100.000000} \
   CONFIG.PCW_ACT_SMC_PERIPHERAL_FREQMHZ {10.000000} \
   CONFIG.PCW_ACT_SPI_PERIPHERAL_FREQMHZ {166.666672} \
   CONFIG.PCW_ACT_TPIU_PERIPHERAL_FREQMHZ {200.000000} \
   CONFIG.PCW_ACT_TTC0_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
   CONFIG.PCW_ACT_TTC0_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
   CONFIG.PCW_ACT_TTC0_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
   CONFIG.PCW_ACT_TTC1_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
   CONFIG.PCW_ACT_TTC1_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
   CONFIG.PCW_ACT_TTC1_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
   CONFIG.PCW_ACT_UART_PERIPHERAL_FREQMHZ {100.000000} \
   CONFIG.PCW_ACT_WDT_PERIPHERAL_FREQMHZ {111.111115} \
   CONFIG.PCW_ARMPLL_CTRL_FBDIV {40} \
   CONFIG.PCW_CAN_PERIPHERAL_DIVISOR0 {1} \
   CONFIG.PCW_CAN_PERIPHERAL_DIVISOR1 {1} \
   CONFIG.PCW_CLK0_FREQ {50000000} \
   CONFIG.PCW_CLK1_FREQ {10000000} \
   CONFIG.PCW_CLK2_FREQ {10000000} \
   CONFIG.PCW_CLK3_FREQ {10000000} \
   CONFIG.PCW_CPU_CPU_PLL_FREQMHZ {1333.333} \
   CONFIG.PCW_CPU_PERIPHERAL_DIVISOR0 {2} \
   CONFIG.PCW_DCI_PERIPHERAL_DIVISOR0 {15} \
   CONFIG.PCW_DCI_PERIPHERAL_DIVISOR1 {7} \
   CONFIG.PCW_DDRPLL_CTRL_FBDIV {32} \
   CONFIG.PCW_DDR_DDR_PLL_FREQMHZ {1066.667} \
   CONFIG.PCW_DDR_PERIPHERAL_DIVISOR0 {4} \
   CONFIG.PCW_DDR_RAM_HIGHADDR {0x1FFFFFFF} \
   CONFIG.PCW_ENET0_ENET0_IO {MIO 16 .. 27} \
   CONFIG.PCW_ENET0_GRP_MDIO_ENABLE {1} \
   CONFIG.PCW_ENET0_GRP_MDIO_IO {MIO 52 .. 53} \
   CONFIG.PCW_ENET0_PERIPHERAL_CLKSRC {IO PLL} \
   CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR0 {8} \
   CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR1 {1} \
   CONFIG.PCW_ENET0_PERIPHERAL_ENABLE {1} \
   CONFIG.PCW_ENET0_PERIPHERAL_FREQMHZ {1000 Mbps} \
   CONFIG.PCW_ENET0_RESET_ENABLE {0} \
   CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR0 {1} \
   CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR1 {1} \
   CONFIG.PCW_ENET1_RESET_ENABLE {0} \
   CONFIG.PCW_ENET_RESET_ENABLE {0} \
   CONFIG.PCW_EN_CLK0_PORT {1} \
   CONFIG.PCW_EN_EMIO_CD_SDIO1 {0} \
   CONFIG.PCW_EN_EMIO_GPIO {1} \
   CONFIG.PCW_EN_EMIO_SDIO1 {0} \
   CONFIG.PCW_EN_EMIO_SPI0 {1} \
   CONFIG.PCW_EN_EMIO_SPI1 {1} \
   CONFIG.PCW_EN_EMIO_UART0 {0} \
   CONFIG.PCW_EN_EMIO_WP_SDIO1 {0} \
   CONFIG.PCW_EN_ENET0 {1} \
   CONFIG.PCW_EN_QSPI {1} \
   CONFIG.PCW_EN_RST0_PORT {1} \
   CONFIG.PCW_EN_SDIO0 {0} \
   CONFIG.PCW_EN_SDIO1 {1} \
   CONFIG.PCW_EN_SPI0 {1} \
   CONFIG.PCW_EN_SPI1 {1} \
   CONFIG.PCW_EN_UART0 {1} \
   CONFIG.PCW_EN_UART1 {1} \
   CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR0 {5} \
   CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR1 {4} \
   CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR0 {1} \
   CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR1 {1} \
   CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR0 {1} \
   CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR1 {1} \
   CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR0 {1} \
   CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR1 {1} \
   CONFIG.PCW_FCLK_CLK0_BUF {TRUE} \
   CONFIG.PCW_FPGA0_PERIPHERAL_FREQMHZ {50} \
   CONFIG.PCW_FPGA_FCLK0_ENABLE {1} \
   CONFIG.PCW_FPGA_FCLK1_ENABLE {0} \
   CONFIG.PCW_FPGA_FCLK2_ENABLE {0} \
   CONFIG.PCW_FPGA_FCLK3_ENABLE {0} \
   CONFIG.PCW_GPIO_EMIO_GPIO_ENABLE {1} \
   CONFIG.PCW_GPIO_EMIO_GPIO_IO {64} \
   CONFIG.PCW_GPIO_EMIO_GPIO_WIDTH {64} \
   CONFIG.PCW_I2C_PERIPHERAL_FREQMHZ {25} \
   CONFIG.PCW_IOPLL_CTRL_FBDIV {30} \
   CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} \
   CONFIG.PCW_IRQ_F2P_INTR {0} \
   CONFIG.PCW_MIO_14_DIRECTION {in} \
   CONFIG.PCW_MIO_14_IOTYPE {<Select>} \
   CONFIG.PCW_MIO_14_PULLUP {enabled} \
   CONFIG.PCW_MIO_14_SLEW {slow} \
   CONFIG.PCW_MIO_15_DIRECTION {out} \
   CONFIG.PCW_MIO_15_IOTYPE {<Select>} \
   CONFIG.PCW_MIO_15_PULLUP {enabled} \
   CONFIG.PCW_MIO_15_SLEW {slow} \
   CONFIG.PCW_MIO_16_DIRECTION {out} \
   CONFIG.PCW_MIO_16_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_16_PULLUP {enabled} \
   CONFIG.PCW_MIO_16_SLEW {fast} \
   CONFIG.PCW_MIO_17_DIRECTION {out} \
   CONFIG.PCW_MIO_17_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_17_PULLUP {enabled} \
   CONFIG.PCW_MIO_17_SLEW {fast} \
   CONFIG.PCW_MIO_18_DIRECTION {out} \
   CONFIG.PCW_MIO_18_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_18_PULLUP {enabled} \
   CONFIG.PCW_MIO_18_SLEW {fast} \
   CONFIG.PCW_MIO_19_DIRECTION {out} \
   CONFIG.PCW_MIO_19_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_19_PULLUP {enabled} \
   CONFIG.PCW_MIO_19_SLEW {fast} \
   CONFIG.PCW_MIO_1_DIRECTION {out} \
   CONFIG.PCW_MIO_1_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_1_PULLUP {enabled} \
   CONFIG.PCW_MIO_1_SLEW {slow} \
   CONFIG.PCW_MIO_20_DIRECTION {out} \
   CONFIG.PCW_MIO_20_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_20_PULLUP {enabled} \
   CONFIG.PCW_MIO_20_SLEW {fast} \
   CONFIG.PCW_MIO_21_DIRECTION {out} \
   CONFIG.PCW_MIO_21_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_21_PULLUP {enabled} \
   CONFIG.PCW_MIO_21_SLEW {fast} \
   CONFIG.PCW_MIO_22_DIRECTION {in} \
   CONFIG.PCW_MIO_22_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_22_PULLUP {enabled} \
   CONFIG.PCW_MIO_22_SLEW {fast} \
   CONFIG.PCW_MIO_23_DIRECTION {in} \
   CONFIG.PCW_MIO_23_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_23_PULLUP {enabled} \
   CONFIG.PCW_MIO_23_SLEW {fast} \
   CONFIG.PCW_MIO_24_DIRECTION {in} \
   CONFIG.PCW_MIO_24_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_24_PULLUP {enabled} \
   CONFIG.PCW_MIO_24_SLEW {fast} \
   CONFIG.PCW_MIO_25_DIRECTION {in} \
   CONFIG.PCW_MIO_25_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_25_PULLUP {enabled} \
   CONFIG.PCW_MIO_25_SLEW {fast} \
   CONFIG.PCW_MIO_26_DIRECTION {in} \
   CONFIG.PCW_MIO_26_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_26_PULLUP {enabled} \
   CONFIG.PCW_MIO_26_SLEW {fast} \
   CONFIG.PCW_MIO_27_DIRECTION {in} \
   CONFIG.PCW_MIO_27_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_27_PULLUP {enabled} \
   CONFIG.PCW_MIO_27_SLEW {fast} \
   CONFIG.PCW_MIO_2_DIRECTION {inout} \
   CONFIG.PCW_MIO_2_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_2_PULLUP {disabled} \
   CONFIG.PCW_MIO_2_SLEW {slow} \
   CONFIG.PCW_MIO_3_DIRECTION {inout} \
   CONFIG.PCW_MIO_3_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_3_PULLUP {disabled} \
   CONFIG.PCW_MIO_3_SLEW {slow} \
   CONFIG.PCW_MIO_40_DIRECTION {inout} \
   CONFIG.PCW_MIO_40_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_40_PULLUP {enabled} \
   CONFIG.PCW_MIO_40_SLEW {slow} \
   CONFIG.PCW_MIO_41_DIRECTION {inout} \
   CONFIG.PCW_MIO_41_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_41_PULLUP {enabled} \
   CONFIG.PCW_MIO_41_SLEW {slow} \
   CONFIG.PCW_MIO_42_DIRECTION {in} \
   CONFIG.PCW_MIO_42_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_42_PULLUP {enabled} \
   CONFIG.PCW_MIO_42_SLEW {slow} \
   CONFIG.PCW_MIO_43_DIRECTION {out} \
   CONFIG.PCW_MIO_43_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_43_PULLUP {enabled} \
   CONFIG.PCW_MIO_43_SLEW {slow} \
   CONFIG.PCW_MIO_44_DIRECTION {out} \
   CONFIG.PCW_MIO_44_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_44_PULLUP {enabled} \
   CONFIG.PCW_MIO_44_SLEW {slow} \
   CONFIG.PCW_MIO_45_DIRECTION {in} \
   CONFIG.PCW_MIO_45_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_45_PULLUP {enabled} \
   CONFIG.PCW_MIO_45_SLEW {slow} \
   CONFIG.PCW_MIO_46_DIRECTION {inout} \
   CONFIG.PCW_MIO_46_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_46_PULLUP {enabled} \
   CONFIG.PCW_MIO_46_SLEW {slow} \
   CONFIG.PCW_MIO_47_DIRECTION {inout} \
   CONFIG.PCW_MIO_47_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_47_PULLUP {enabled} \
   CONFIG.PCW_MIO_47_SLEW {slow} \
   CONFIG.PCW_MIO_48_DIRECTION {inout} \
   CONFIG.PCW_MIO_48_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_48_PULLUP {enabled} \
   CONFIG.PCW_MIO_48_SLEW {slow} \
   CONFIG.PCW_MIO_49_DIRECTION {inout} \
   CONFIG.PCW_MIO_49_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_49_PULLUP {enabled} \
   CONFIG.PCW_MIO_49_SLEW {slow} \
   CONFIG.PCW_MIO_4_DIRECTION {inout} \
   CONFIG.PCW_MIO_4_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_4_PULLUP {disabled} \
   CONFIG.PCW_MIO_4_SLEW {slow} \
   CONFIG.PCW_MIO_50_DIRECTION {inout} \
   CONFIG.PCW_MIO_50_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_50_PULLUP {enabled} \
   CONFIG.PCW_MIO_50_SLEW {slow} \
   CONFIG.PCW_MIO_51_DIRECTION {inout} \
   CONFIG.PCW_MIO_51_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_51_PULLUP {enabled} \
   CONFIG.PCW_MIO_51_SLEW {slow} \
   CONFIG.PCW_MIO_52_DIRECTION {out} \
   CONFIG.PCW_MIO_52_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_52_PULLUP {enabled} \
   CONFIG.PCW_MIO_52_SLEW {fast} \
   CONFIG.PCW_MIO_53_DIRECTION {inout} \
   CONFIG.PCW_MIO_53_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_53_PULLUP {enabled} \
   CONFIG.PCW_MIO_53_SLEW {fast} \
   CONFIG.PCW_MIO_5_DIRECTION {inout} \
   CONFIG.PCW_MIO_5_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_5_PULLUP {disabled} \
   CONFIG.PCW_MIO_5_SLEW {slow} \
   CONFIG.PCW_MIO_6_DIRECTION {out} \
   CONFIG.PCW_MIO_6_IOTYPE {LVCMOS 1.8V} \
   CONFIG.PCW_MIO_6_PULLUP {disabled} \
   CONFIG.PCW_MIO_6_SLEW {slow} \
   CONFIG.PCW_MIO_TREE_PERIPHERALS {unassigned#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#unassigned#Quad SPI Flash#Quad SPI Flash#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#UART 0#UART 0#UART 1#UART 1#SD 1#SD 1#SD 1#SD 1#SD 1#SD 1#Enet 0#Enet 0} \
   CONFIG.PCW_MIO_TREE_SIGNALS {unassigned#qspi0_ss_b#qspi0_io[0]#qspi0_io[1]#unassigned#qspi0_io[3]/HOLD_B#qspi0_sclk#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#tx_clk#txd[0]#txd[1]#txd[2]#txd[3]#tx_ctl#rx_clk#rxd[0]#rxd[1]#rxd[2]#rxd[3]#rx_ctl#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#rx#tx#tx#rx#data[0]#cmd#clk#data[1]#data[2]#data[3]#mdc#mdio} \
   CONFIG.PCW_NAND_GRP_D8_ENABLE {0} \
   CONFIG.PCW_NAND_PERIPHERAL_ENABLE {0} \
   CONFIG.PCW_NOR_GRP_A25_ENABLE {0} \
   CONFIG.PCW_NOR_GRP_CS0_ENABLE {0} \
   CONFIG.PCW_NOR_GRP_CS1_ENABLE {0} \
   CONFIG.PCW_NOR_GRP_SRAM_CS0_ENABLE {0} \
   CONFIG.PCW_NOR_GRP_SRAM_CS1_ENABLE {0} \
   CONFIG.PCW_NOR_GRP_SRAM_INT_ENABLE {0} \
   CONFIG.PCW_NOR_PERIPHERAL_ENABLE {0} \
   CONFIG.PCW_PCAP_PERIPHERAL_DIVISOR0 {5} \
   CONFIG.PCW_PJTAG_PERIPHERAL_ENABLE {0} \
   CONFIG.PCW_PRESET_BANK0_VOLTAGE {LVCMOS 1.8V} \
   CONFIG.PCW_PRESET_BANK1_VOLTAGE {LVCMOS 1.8V} \
   CONFIG.PCW_QSPI_GRP_FBCLK_ENABLE {0} \
   CONFIG.PCW_QSPI_GRP_IO1_ENABLE {0} \
   CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE {1} \
   CONFIG.PCW_QSPI_GRP_SINGLE_SS_IO {MIO 1 .. 6} \
   CONFIG.PCW_QSPI_GRP_SS1_ENABLE {0} \
   CONFIG.PCW_QSPI_PERIPHERAL_DIVISOR0 {5} \
   CONFIG.PCW_QSPI_PERIPHERAL_ENABLE {1} \
   CONFIG.PCW_QSPI_PERIPHERAL_FREQMHZ {200} \
   CONFIG.PCW_QSPI_QSPI_IO {MIO 1 .. 6} \
   CONFIG.PCW_SD0_GRP_CD_ENABLE {0} \
   CONFIG.PCW_SD0_GRP_POW_ENABLE {0} \
   CONFIG.PCW_SD0_GRP_WP_ENABLE {0} \
   CONFIG.PCW_SD0_PERIPHERAL_ENABLE {0} \
   CONFIG.PCW_SD0_SD0_IO {<Select>} \
   CONFIG.PCW_SD1_GRP_CD_ENABLE {0} \
   CONFIG.PCW_SD1_GRP_POW_ENABLE {0} \
   CONFIG.PCW_SD1_GRP_WP_ENABLE {0} \
   CONFIG.PCW_SD1_PERIPHERAL_ENABLE {1} \
   CONFIG.PCW_SD1_SD1_IO {MIO 46 .. 51} \
   CONFIG.PCW_SDIO_PERIPHERAL_DIVISOR0 {10} \
   CONFIG.PCW_SDIO_PERIPHERAL_FREQMHZ {100} \
   CONFIG.PCW_SDIO_PERIPHERAL_VALID {1} \
   CONFIG.PCW_SINGLE_QSPI_DATA_MODE {x2} \
   CONFIG.PCW_SMC_PERIPHERAL_DIVISOR0 {1} \
   CONFIG.PCW_SPI0_GRP_SS0_ENABLE {1} \
   CONFIG.PCW_SPI0_GRP_SS0_IO {EMIO} \
   CONFIG.PCW_SPI0_GRP_SS1_ENABLE {1} \
   CONFIG.PCW_SPI0_GRP_SS1_IO {EMIO} \
   CONFIG.PCW_SPI0_GRP_SS2_ENABLE {1} \
   CONFIG.PCW_SPI0_GRP_SS2_IO {EMIO} \
   CONFIG.PCW_SPI0_PERIPHERAL_ENABLE {1} \
   CONFIG.PCW_SPI0_SPI0_IO {EMIO} \
   CONFIG.PCW_SPI1_GRP_SS0_ENABLE {1} \
   CONFIG.PCW_SPI1_GRP_SS0_IO {EMIO} \
   CONFIG.PCW_SPI1_GRP_SS1_ENABLE {1} \
   CONFIG.PCW_SPI1_GRP_SS1_IO {EMIO} \
   CONFIG.PCW_SPI1_GRP_SS2_ENABLE {1} \
   CONFIG.PCW_SPI1_GRP_SS2_IO {EMIO} \
   CONFIG.PCW_SPI1_PERIPHERAL_ENABLE {1} \
   CONFIG.PCW_SPI1_SPI1_IO {EMIO} \
   CONFIG.PCW_SPI_PERIPHERAL_DIVISOR0 {6} \
   CONFIG.PCW_SPI_PERIPHERAL_FREQMHZ {166.666666} \
   CONFIG.PCW_SPI_PERIPHERAL_VALID {1} \
   CONFIG.PCW_TPIU_PERIPHERAL_DIVISOR0 {1} \
   CONFIG.PCW_UART0_GRP_FULL_ENABLE {0} \
   CONFIG.PCW_UART0_PERIPHERAL_ENABLE {1} \
   CONFIG.PCW_UART0_UART0_IO {MIO 42 .. 43} \
   CONFIG.PCW_UART1_GRP_FULL_ENABLE {0} \
   CONFIG.PCW_UART1_PERIPHERAL_ENABLE {1} \
   CONFIG.PCW_UART1_UART1_IO {MIO 44 .. 45} \
   CONFIG.PCW_UART_PERIPHERAL_DIVISOR0 {10} \
   CONFIG.PCW_UART_PERIPHERAL_FREQMHZ {100} \
   CONFIG.PCW_UART_PERIPHERAL_VALID {1} \
   CONFIG.PCW_UIPARAM_ACT_DDR_FREQ_MHZ {266.666687} \
   CONFIG.PCW_UIPARAM_DDR_BANK_ADDR_COUNT {3} \
   CONFIG.PCW_UIPARAM_DDR_BUS_WIDTH {16 Bit} \
   CONFIG.PCW_UIPARAM_DDR_CL {7} \
   CONFIG.PCW_UIPARAM_DDR_COL_ADDR_COUNT {10} \
   CONFIG.PCW_UIPARAM_DDR_CWL {6} \
   CONFIG.PCW_UIPARAM_DDR_DEVICE_CAPACITY {4096 MBits} \
   CONFIG.PCW_UIPARAM_DDR_DRAM_WIDTH {16 Bits} \
   CONFIG.PCW_UIPARAM_DDR_ECC {Disabled} \
   CONFIG.PCW_UIPARAM_DDR_FREQ_MHZ {266.6666666} \
   CONFIG.PCW_UIPARAM_DDR_PARTNO {MT41K256M16 RE-15E} \
   CONFIG.PCW_UIPARAM_DDR_ROW_ADDR_COUNT {15} \
   CONFIG.PCW_UIPARAM_DDR_SPEED_BIN {DDR3_1066F} \
   CONFIG.PCW_UIPARAM_DDR_T_FAW {45.0} \
   CONFIG.PCW_UIPARAM_DDR_T_RAS_MIN {36.0} \
   CONFIG.PCW_UIPARAM_DDR_T_RC {49.5} \
   CONFIG.PCW_UIPARAM_DDR_T_RCD {7} \
   CONFIG.PCW_UIPARAM_DDR_T_RP {7} \
   CONFIG.PCW_UIPARAM_DDR_USE_INTERNAL_VREF {1} \
   CONFIG.PCW_USE_FABRIC_INTERRUPT {0} \
   CONFIG.PCW_USE_M_AXI_GP0 {1} \
   CONFIG.PCW_USE_M_AXI_GP1 {0} \
   CONFIG.PCW_USE_S_AXI_HP0 {0} \
] $processing_system7_0
```

**For xc7z020cfg400-2 (RFSwitch):**

## TCL Script Template

After collecting all required information via `AskUserQuestion`, generate a TCL script using this template structure:

```tcl
# =============================================================================
# Vivado Project Auto-Generation Script
# Project: {{PROJECT_NAME}}
# Generated: {{TIMESTAMP}}
# =============================================================================

# Set Vivado installation path
set vivado_path "{{VIVADO_PATH}}"

# Create project
create_project {{PROJECT_NAME}} ./{{PROJECT_NAME}} -part {{DEVICE_PART}} -force

# Set project parameters
set_property target_language Verilog [current_project]

# Check if device is Zynq series (starts with xc7z)
set device_part "{{DEVICE_PART}}"
set is_zynq [regexp {^xc7z} $device_part]

# Create Block Design for Zynq devices
if {$is_zynq} {
   # Add PS configuration based on device type
   # See "Zynq PS Configuration" section above for device-specific configs
   {{ZYNQ_PS_CONFIG_BLOCK}}
}

# Create default constraint file
set constraint_file "{{PROJECT_NAME}}_constraints.xdc"
set constr_file_obj [open ./{{PROJECT_NAME}}/$constraint_file w]
puts $constr_file_obj "# Timing constraints for {{PROJECT_NAME}}"
puts $constr_file_obj "# Add your constraints here"
close $constr_file_obj

add_files -fileset constrs_1 -norecurse ./{{PROJECT_NAME}}/$constraint_file

# Create source directories
file mkdir ./{{PROJECT_NAME}}/src
file mkdir ./{{PROJECT_NAME}}/sim
file mkdir ./{{PROJECT_NAME}}/synth

# Print project info
puts "=========================================="
puts "Project '{{PROJECT_NAME}}' created successfully!"
puts "Device: {{DEVICE_PART}}"
if {$is_zynq} {
   puts "PS Configured: Yes"
} else {
   puts "PS Configured: No (Pure FPGA device)"
}
puts "=========================================="

# Save project
save_project_as {{PROJECT_NAME}} ./{{PROJECT_NAME}}
```

## Variable Replacement

Replace the template variables with user-provided values:

| Variable | Description |
|----------|-------------|
| `{{VIVADO_PATH}}` | Vivado installation path (always: `D:/Xilinx/Vivado/2018.1`) |
| `{{PROJECT_NAME}}` | Project name |
| `{{DEVICE_PART}}` | FPGA part number |
| `{{TIMESTAMP}}` | Current date/time |
| `{{ZYNQ_PS_CONFIG_BLOCK}}` | For Zynq devices only: Block Design PS configuration (see above) |

## Output File

Save the generated TCL script as:
- Default: `create_vivado_project.tcl` in the current working directory
- Or use the project name: `create_{PROJECT_NAME}_project.tcl`

## Usage Instructions

After generating the script, provide the user with clear instructions:

```
To run this script in Vivado:

1. Open Vivado:
   - Start Menu → Xilinx Vivado [version]

2. In the Vivado Tcl Console, run:
   source /path/to/create_vivado_project.tcl

3. Or from command line:
   cd /path/to/script/directory
   vivado -mode tcl -source create_vivado_project.tcl
```

## Best Practices

1. **Validate the part number**: The TCL script uses the part number directly. Ensure the user enters a valid Xilinx part number format.

2. **Path handling**: Windows paths in TCL use forward slashes `/` even though Windows uses backslashes `\`. Convert backslashes to forward slashes if the user provides them.

3. **Project location**: The script creates the project in a subdirectory named after the project. This keeps the workspace organized.

4. **Force flag**: The `-force` flag in `create_project` overwrites existing projects. Warn users if they already have a project with the same name.

## Error Handling

If the script execution fails, common causes include:

1. **Invalid part number** - Check the part number format matches Xilinx naming convention
2. **Path issues** - Ensure Vivado path uses forward slashes
3. **Permissions** - Ensure write permissions in the target directory
4. **Vivado version** - Some features may vary between Vivado versions

## Optional Extensions

After the basic project is created, you can offer to help with:

- Adding IP integrator blocks
- Setting up simulation waveforms
- Creating custom constraints
- Adding existing source files
- Configuring synthesis and implementation settings