提交SMOD ATSC IMX APP版本 V122

2026-07-16 14:35:59 +08:00
commit 7601c270d5
485 changed files with 255032 additions and 0 deletions
@@ -0,0 +1,113 @@
+#ifndef __UART_USER_H__
+#define __UART_USER_H__
+
+#include "type.h"
+#include "config.h"
+#include "igpio.h"
+
+
+//---------------------------------------------
+
+#define UART_ONESHU_CLOSED      0
+#define NO_USE                  0
+#define __LINUX_SYS_TIME__      1
+#define RS485_GPIO_NUM_DE       GPIO_NUM_1_5
+
+
+//---------------------------------------------
+
+#define UART_USER_232_COM    1
+#define UART_USER_485_COM    2
+
+
+#define RS232_NUM      8
+#define RS232_HEAD     0x47
+#define RS232_WEEPROM  0X82
+#define RS232_WSPECIAL 0X84
+#define RS232_TAILH    0x0d
+#define RS232_TAILL    0x0a
+typedef enum
+{
+   OUT_HEAD    ,
+   OUT_COMMAND ,
+   OUT_ADDRH   ,
+   OUT_ADDRL   ,
+   OUT_DATA    ,
+   OUT_CHECKSUM,
+   OUT_TAILH   ,
+   OUT_TAILL
+}OUT_ENUM;
+
+enum
+{
+    UART_PARA_SET_ERR_OK = 0,
+    UART_PARA_SET_ERR_LOCAL,
+    UART_PARA_SET_ERR_INVALID,
+    UART_PARA_SET_ERR_SUM,
+    UART_PARA_SET_ERR_DRYLOOP,
+    UART_PARA_SET_ERR_AGC_ON,
+    UART_PARA_SET_ERR_UNKNOW_CMD,
+};
+
+typedef enum    //CMMB与EXCITER共用
+{
+    CMMB_CONFIG_STEP_9V_VOL=0xa0,
+    CMMB_CONFIG_STEP_50V_VOL,
+    CMMB_CONFIG_STEP_50V_CUR,
+    CMMB_CONFIG_STEP_881_GV,
+    CMMB_CONFIG_STEP_FWD,
+    CMMB_CONFIG_STEP_REF,
+    CMMB_CONFIG_STEP_VSWR,
+    CMMB_CONFIG_STEP_TEMP,
+    CMMB_CONFIG_STEP_REF_ALARM,
+    CMMB_CONFIG_STEP_FWD_ALARM,
+    CMMB_CONFIG_STEP_TEMP_ALARM,
+
+    CMMB_CONFIG_STEP_50V_CUR2,
+    CMMB_CONFIG_STEP_POWER_DEGREE,
+    CMMB_CONFIG_STEP_FWD_HEX,
+    CMMB_CONFIG_STEP_IP_ADDR,
+    CMMB_CONFIG_STEP_MASK_ADDR,   //0xaf
+    CMMB_CONFIG_STEP_GATEWAY_ADDR,
+
+    CMMB_CONFIG_STEP_50V_CUR3,
+    CMMB_CONFIG_STEP_50V_CUR4,
+    CMMB_CONFIG_STEP_IN,
+    CMMB_CONFIG_STEP_12V_VOL,
+
+    CMMB_CONFIG_STEP_SLOW_FLAG,   //向ATSC激励器发送缓开机标识
+    CMMB_CONFIG_STEP_FINE_POWER,
+    CMMB_CONFIG_STEP_ALARM,
+
+    CMMB_CONFIG_EXC_RESET,//远程复位atsc激励器
+    
+    CMMB_CONFIG_STEP_OVER,
+}EXCITER_SET_CMD;
+
+extern uint32 uart_init_set_result_frame(uint8 *pin,uint8 *pout,uint32 err);
+extern void e2rom_save_power(S_RF_PARA *ppara);
+extern uint32 get_menu_index(void);
+extern BOOL proc_key_update(void * parg, uint8 key);
+extern uint32 get_menu_index(void);
+extern uint32 protocol_read(uint8 *pbufin,uint8 *pbufout);
+extern uint32 protocol_write(uint8 *pbufin,uint8 *pbufout);
+
+extern void pa_conn_chk(void);
+uint32 pa_conn_sta(void);
+
+void uart_task(void * pvParameters);
+extern int creat_uart_thread(void);
+
+
+extern void dev_pa_link_sec_check(void);
+extern int creat_uart_thread(void);
+extern int rs485_send_string(const uint8 *pbuf,uint32 len);
+extern int gps_uart_hw_init(void);
+extern int gps_rs232_read_string(uint8 *pbuf,uint32 len);
+extern int gps_rs232_send_string(const uint8 *pbuf,uint32 len);
+
+extern int rs232_send_string(const uint8 *pbuf,uint32 len);
+extern int rs232_read_string(uint8 *pbuf,uint32 len);
+
+#endif
+