V124 1.修正功率配置过程，避免升功率或降功率时配置瞬间可能超出目标功率值的问题；2.修正上一版本配置功率时按下确认键，导致瞬间功率下降问题；3.调整LCD配置功率上限为衰减器最大上限；4.修正RS485通讯问题；

2026-07-21 17:30:38 +08:00
parent 7601c270d5
commit b03e270dab
17 changed files with 310 additions and 53 deletions
@@ -4,8 +4,8 @@
 void cfg_adrv_att(uint16 set_att);
 void cfg_adrv_orx_manu_gain(uint8 orx_manu_gain_index);
 void chang_freq(uint8 radio_ctl, int freq_changed);
-void cfg_fpga_agc_att(uint8 agc_att);
-void get_adrv9009_c0_orx_range(uint8 *pmin ,uint8 *pmax);
+void cfg_fpga_agc_att(uint8 agc_att);
+void get_adrv9009_c0_orx_range(uint8 *pmin ,uint8 *pmax);
 void cfg_adrv9009_spi_ctrl_source(uint8 ctrl_src);
 int adrv9009_set_tx_path_enable(uint8 enable);

@@ -199,6 +199,7 @@
 //对于5段地址冲突的部分需要禁用
 #define ADDR_CONFLICT_DISABLED		1

+#define DBG_PR_FSSI_FWD			(0)
 #endif//usr_def
 //+++++++++++++++++++++++++++++++++++++++

@@ -125,6 +125,7 @@ extern uint32 internal_set_base_delay(uint32 delay);
 #endif//@MK_MTB_TSOIP

 void fpga_save_power(S_WE_PARA *pwe,S_RF_PARA *prf);
+uint16 fpga_limit_power_target(S_WE_PARA *pwe, S_RF_PARA *prf, uint16 target_power);
 void fpga_set_rf_output(uint8 rf);
 void fpga_boot_rf_hold_begin(void);
 void fpga_boot_rf_hold_release(void);
@@ -5,6 +5,7 @@
 #define   SHELL_CTRL_GPIO           0

 #define   GPIO_NUM_1_5              ((1-1)*32+5)
+#define   GPIO_NUM_1_1              ((1-1)*32+1)

 //key gpio
 //GPIO4_IO22 = (4-1)*32+22=118
@@ -11,7 +11,7 @@
 #define UART_ONESHU_CLOSED      0
 #define NO_USE                  0
 #define __LINUX_SYS_TIME__      1
-#define RS485_GPIO_NUM_DE       GPIO_NUM_1_5
+#define RS485_GPIO_NUM_DE       GPIO_NUM_1_1


 //---------------------------------------------
@@ -1451,6 +1451,7 @@ uint32 ts_get_input_port(uint8 tmp);
 uint32 psip_calc_sn_licence(uint32 key,uint64 *psn);
 uint32 eas_calc_sn_licence(uint32 key,uint64 *psn);
 void rf_power_set_new(uint16 new_power);
+void apply_rf_power_para(S_RF_PARA *ppara);

 static int math_abs(int i)  //内嵌形式
 {