rfeng/smod_atsc_app
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
main
smod_atsc_app/atsc_app/tuner/tuner_conf.c
T

490 lines
16 KiB
C
Executable File
Raw Permalink Blame History

/*
Copyright (C) 2010 NXP B.V., All Rights Reserved.
This source code and any compilation or derivative thereof is the proprietary
information of NXP B.V. and is confidential in nature. Under no circumstances
is this software to be exposed to or placed under an Open Source License of
any type without the expressed written permission of NXP B.V.
*
* \file main.c
*
* 3
*
* \date %2011.5.4%
*
* \brief V7 tuner driver
*
* REFERENCE DOCUMENTS :
* OM3912_Driver_User_Guide.pdf
*
* Detailed description may be added here.
*
* \section info Change Information
*
*/
#include "../inc/config.h"
#if USE_TUNER
//*--------------------------------------------------------------------------------------
//* Include Standard files
//*--------------------------------------------------------------------------------------
#include <stdio.h>
#include <stdarg.h>
#include "tmNxTypes.h"
#include "tmCompId.h"
#include "tmFrontEnd.h"
#include "tmbslFrontEndTypes.h"
#include "../inc/delay.h"
//*--------------------------------------------------------------------------------------
//* Include Driver files
//*--------------------------------------------------------------------------------------
#include "tmbslTDA18273.h"
//*--------------------------------------------------------------------------------------
//* Tuner I2C device address
//*--------------------------------------------------------------------------------------
#define TUN_I2C_ADDR 0xC6 //0xC0
uint32 tuner_byte_write(uint32 addr,uint8 data);
uint8 tuner_byte_read(uint32 addr);
/**** Device table. List of device drivers for newlib. ****/
const struct device_table_entry *device_table[] = {
0,
0,
0,
0 }; /* end of list */
/* It seems that int isatty(int) is no longer provided by the environment, see the
example lpc2106_hello_rs232_newlib and the various syscalls.c for a workaround if
the error message "unknown reference to isatty" appears during the link-process.
(Reason might be the additional configure-option --disable-newlib-supplied-syscalls for
newlib which had to be added since the build of newlib 1.14.0 failed when the "supplied"
syscalls were not disabled.) */
int isatty(int);
extern int isatty(int fd)
{
return 1;
}
//*--------------------------------------------------------------------------------------
//* Prototype of function to be provided by customer
//*--------------------------------------------------------------------------------------
tmErrorCode_t UserWrittenWait(tmUnitSelect_t tUnit, UInt32 tms);
tmErrorCode_t UserWrittenPrint(UInt32 level, const char* format, ...);
tmErrorCode_t UserWrittenMutexInit(ptmbslFrontEndMutexHandle *ppMutexHandle);
tmErrorCode_t UserWrittenMutexDeInit( ptmbslFrontEndMutexHandle pMutex);
tmErrorCode_t UserWrittenMutexAcquire(ptmbslFrontEndMutexHandle pMutex, UInt32 timeOut);
tmErrorCode_t UserWrittenMutexRelease(ptmbslFrontEndMutexHandle pMutex);
//*--------------------------------------------------------------------------------------
//* Template of function to be provided by customer
//*--------------------------------------------------------------------------------------
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenI2CRead
//* Object :
//* Input Parameters : tmUnitSelect_t tUnit
//* UInt32 AddrSize,
//* UInt8* pAddr,
//* UInt32 ReadLen,
//* UInt8* pData
//* Output Parameters : tmErrorCode_t.
//*--------------------------------------------------------------------------------------
static tmErrorCode_t UserWrittenI2CRead(tmUnitSelect_t tUnit, UInt32 AddrSize, UInt8* pAddr,UInt32 ReadLen, UInt8* pData)
{
tmErrorCode_t err = TM_OK;
#if USE_TUNER_18273
UInt8 reg_addr;
reg_addr = *pAddr;
while(ReadLen--)
{
*pData++ = tuner_byte_read(reg_addr++);
}
#endif
return err;
}
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenI2CWrite
//* Object :
//* Input Parameters : tmUnitSelect_t tUnit
//* UInt32 AddrSize,
//* UInt8* pAddr,
//* UInt32 WriteLen,
//* UInt8* pData
//* Output Parameters : tmErrorCode_t.
//*--------------------------------------------------------------------------------------
static tmErrorCode_t UserWrittenI2CWrite (tmUnitSelect_t tUnit,UInt32 AddrSize, UInt8* pAddr,UInt32 WriteLen, UInt8* pData)
{
tmErrorCode_t err = TM_OK;
#if USE_TUNER_18273
unsigned char reg_addr;
reg_addr = *pAddr;
while(WriteLen--)
{
tuner_byte_write(reg_addr++,*pData++);
}
#endif
return err;
}
//extern uint32 UserWrittenI2CRead(int tUnit,uint32 AddrSize, uint8* pAddr,uint32 ReadLen, uint8* pData);
//extern uint32 UserWrittenI2CWrite(int tUnit,uint32 AddrSize, uint8* pAddr,uint32 WriteLen, uint8* pData);
//*--------------------------------------------------------------------------------------
//* Function Name : Main
//* Object : Software entry point
//* Input Parameters : none.
//* Output Parameters : none.
//* Current Unit is : 0
//*--------------------------------------------------------------------------------------
int TunerConf(uint32 conf_rf_freq)
{//* Begin
/* Variable declarations */
tmErrorCode_t err = TM_OK;
tmbslFrontEndDependency_t sSrvTunerFunc;
#if USE_TUNER_18273
tmTDA18273StandardMode_t stdMode = tmTDA18273_QAM_6MHz; // modified to Winnetech standard
#else
tmTDA18273StandardMode_t stdMode = tmTDA18273_ATSC_6MHz;
#endif
UInt32 uRF; // RF frequency in Hz
tmbslFrontEndState_t PLLLock = tmbslFrontEndStateUnknown;
UInt32 uIF = 0;
uRF = conf_rf_freq;
/* Driver layer struct set-up to link with user written functions */
sSrvTunerFunc.sIo.Write = UserWrittenI2CWrite;
sSrvTunerFunc.sIo.Read = UserWrittenI2CRead;
sSrvTunerFunc.sTime.Get = Null;
sSrvTunerFunc.sTime.Wait = UserWrittenWait;
sSrvTunerFunc.sDebug.Print = UserWrittenPrint;
sSrvTunerFunc.sMutex.Init = NULL;
sSrvTunerFunc.sMutex.DeInit = NULL;
sSrvTunerFunc.sMutex.Acquire = NULL;
sSrvTunerFunc.sMutex.Release = NULL;
sSrvTunerFunc.dwAdditionalDataSize = 0;
sSrvTunerFunc.pAdditionalData = Null;
/*Deinitialize former Instance, if necessary*/
tmbslTDA18273_Close(0); // or tmbslTDA18273DeInit(0);
/* TDA18273 Driver initialization */
err = tmbslTDA18273_Open(0, &sSrvTunerFunc); // or tmbslTDA18273Init(0, &sSrvTunerFunc);
if(err == TM_OK)
{
/* TDA18273 Hardware initialization */
err = tmbslTDA18273_HwInit(0); // or tmbslTDA18273Reset(0);
}//else
// printf("err.%s %d\n",__FUNCTION__,__LINE__);
tmbslTDA18273_CheckHWVersion(0);
if(err == TM_OK)
{
/* TDA18273 standard mode selection */
err = tmbslTDA18273_SetStandardMode(0, stdMode); // or tmbslTDA18273SetStandardMode(0, stdMode);
}//else
// printf("err.%s %d\n",__FUNCTION__,__LINE__);
//-----<< -----have err on there
if(err == TM_OK)
{
/* TDA18273 RF frequency selection */
err = tmbslTDA18273_SetRF(0, uRF); // or tmbslTDA18273SetRf(0, uRF);
}//else
// printf("err.%s %d\n",__FUNCTION__,__LINE__);
if(err == TM_OK)
{
/* Get TDA18273 PLL Lock status */
err = tmbslTDA18273_GetLockStatus(0, &PLLLock); // or tmbslTDA18273GetLockStatus(0, &PLLLock);
//printf("Tuner Lock State = %d\n",PLLLock);
}//else
// printf("err.%s %d\n",__FUNCTION__,__LINE__);
if(err == TM_OK)
{
/* Get TDA18273 IF value */
err = tmbslTDA18273_GetIF(0, &uIF); // or tmbslTDA18273GetIF(0, &uIF);
}//else
// printf("err.%s %d\n",__FUNCTION__,__LINE__);
if(err == TM_OK)
{
/* Put TDA18273 in standby mode: */
err = tmbslTDA18273_SetPowerState(0, tmPowerOn);
}//else
// printf("err.%s %d\n",__FUNCTION__,__LINE__);
if(err == TM_OK)
{
/*Do not Deinitialize TDA18273 here */
/* DeInitialize TDA18273 Driver */
//err = tmbslTDA18273_Close(0); // or tmbslTDA18273DeInit(0);
}
return err;
}//* End
int iic_rx_tun_readstate(void)
{//Begin
tmErrorCode_t err = TM_OK;
unsigned char i2caddr = 0x31;
unsigned char i2cdata = 0;
unsigned short temp;
/*read RSSI*/
err = tmbslTDA18273_GetPowerLevel(0,&i2cdata);
//printf("RSSI\t=\t%fdBuV\n", ((float)i2cdata)/2.0);
/*read RF filter gain*/
if(err == TM_OK)
{
err = UserWrittenI2CRead(0, 1, &i2caddr, 1, &i2cdata);
}
if(err == TM_OK)
{
temp = (i2cdata & 0x30)>>4;
switch(temp){
case 0: printf("RF filter gain\t=\t-11dB(min)\n");break;
case 1: printf("RF filter gain\t=\t-08dB\n");break;
case 2: printf("RF filter gain\t=\t-05dB\n");break;
case 3: printf("RF filter gain\t=\t-02dB(max)\n");break;
}
}
/*read LNA gain*/
if(err == TM_OK)
{
temp = i2cdata & 0x0F;
switch(temp){
case 0: printf("LNA gain\t=\t-10dB(min)\n");break;
case 1: printf("LNA gain\t=\t-07dB\n");break;
case 2: printf("LNA gain\t=\t-04dB\n");break;
case 3: printf("LNA gain\t=\t-01dB\n");break;
case 4: printf("LNA gain\t=\t+02dB\n");break;
case 5: printf("LNA gain\t=\t+05dB\n");break;
case 6: printf("LNA gain\t=\t+08dB\n");break;
case 7: printf("LNA gain\t=\t+11dB\n");break;
case 8: printf("LNA gain\t=\t+14dB\n");break;
case 9: printf("LNA gain\t=\t+17dB\n");break;
case 10: printf("LNA gain\t=\t+20dB(max)\n");break;
}
}
/*read RFAGC gain*/
if(err == TM_OK)
{
i2caddr = 0x34;
err = UserWrittenI2CRead(0, 1, &i2caddr, 1, &i2cdata);
}
if(err == TM_OK)
{
temp = i2cdata;
i2caddr = 0x33;
err = UserWrittenI2CRead(0, 1, &i2caddr, 1, &i2cdata);
}
if(err == TM_OK)
{
temp = temp|((i2cdata&0x80)<<1);
printf("RFAGC Gain\t=\t0x%.3x",temp);
if(temp == 0)
printf("(min)\n");
else if(temp == 0x1FF)
printf("(max)\n");
else
printf("\n");
}
/*read IF AGC gain*/
if(err == TM_OK)
{
i2caddr = 0x35;
err = UserWrittenI2CRead(0, 1, &i2caddr, 1, &i2cdata);
}
if(err == TM_OK)
{
temp = (i2cdata & 0x38)>>3;
switch(temp){
case 0: printf("Lowpass gain\t=\t-06dB(min)\n");break;
case 1: printf("Lowpass gain\t=\t-03dB\n");break;
case 2: printf("Lowpass gain\t=\t+00dB\n");break;
case 3: printf("Lowpass gain\t=\t+03dB\n");break;
case 4: printf("Lowpass gain\t=\t+06dB\n");break;
case 5: printf("Lowpass gain\t=\t+09dB\n");break;
case 6: printf("Lowpass gain\t=\t+12dB\n");break;
case 7: printf("Lowpass gain\t=\t+15dB(max)\n");break;
}
}
if(err == TM_OK)
{
temp = i2cdata & 0x07;
switch(temp){
case 0: printf("Mixer gain\t=\t+02dB(min)\n");break;
case 1: printf("Mixer gain\t=\t+05dB\n");break;
case 2: printf("Mixer gain\t=\t+08dB\n");break;
case 3: printf("Mixer gain\t=\t+11dB\n");break;
case 4: printf("Mixer gain\t=\t+14dB(max)\n");break;
}
}
return err;
}//*End
int TunerReadRSSI(unsigned char* pRSSI)
{
return tmbslTDA18273_GetPowerLevel(0,pRSSI);
}
int TunerRead18273lock(void)
{
tmbslFrontEndState_t lock;
tmbslTDA18273_GetLockStatus(0,&lock);
return (int)lock;
}
int TunerRead18273mode(void)
{
TDA18273StandardMode_t smode;
tmbslTDA18273_GetStandardMode(0,&smode);
return (int)smode;
}
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenWait
//* Object :
//* Input Parameters : tmUnitSelect_t tUnit
//* UInt32 tms
//* Output Parameters : tmErrorCode_t.
//* Not used in the driver
//*--------------------------------------------------------------------------------------
tmErrorCode_t UserWrittenWait(tmUnitSelect_t tUnit, UInt32 tms)
{
/* Variable declarations */
tmErrorCode_t err = TM_OK;
/* Customer code here */
/* ...*/
delay_ms(tms);
/* ...*/
/* End of Customer code here */
return err;
}
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenPrint
//* Object :
//* Input Parameters : UInt32 level, const char* format, ...
//*
//* Output Parameters : tmErrorCode_t.
//*--------------------------------------------------------------------------------------
tmErrorCode_t UserWrittenPrint(UInt32 level, const char* format, ...)
{
/* Variable declarations */
tmErrorCode_t err = TM_OK;
/* Customer code here */
/* ...*/
va_list argp;
va_start(argp,format);
printf(format,argp);
va_end(argp);
/* ...*/
/* End of Customer code here */
return err;
}
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenMutexInit
//* Object :
//* Input Parameters : ptmbslFrontEndMutexHandle *ppMutexHandle
//* Output Parameters : tmErrorCode_t.
//*--------------------------------------------------------------------------------------
tmErrorCode_t UserWrittenMutexInit(ptmbslFrontEndMutexHandle *ppMutexHandle)
{
/* Variable declarations */
tmErrorCode_t err = TM_OK;
/* Customer code here */
/* ...*/
/* ...*/
/* End of Customer code here */
return err;
}
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenMutexDeInit
//* Object :
//* Input Parameters : ptmbslFrontEndMutexHandle pMutex
//* Output Parameters : tmErrorCode_t.
//*--------------------------------------------------------------------------------------
tmErrorCode_t UserWrittenMutexDeInit( ptmbslFrontEndMutexHandle pMutex)
{
/* Variable declarations */
tmErrorCode_t err = TM_OK;
/* Customer code here */
/* ...*/
/* ...*/
/* End of Customer code here */
return err;
}
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenMutexAcquire
//* Object :
//* Input Parameters : ptmbslFrontEndMutexHandle pMutex, UInt32 timeOut
//* Output Parameters : tmErrorCode_t.
//*--------------------------------------------------------------------------------------
tmErrorCode_t UserWrittenMutexAcquire(ptmbslFrontEndMutexHandle pMutex, UInt32 timeOut)
{
/* Variable declarations */
tmErrorCode_t err = TM_OK;
/* Customer code here */
/* ...*/
/* ...*/
/* End of Customer code here */
return err;
}
//*--------------------------------------------------------------------------------------
//* Function Name : UserWrittenMutexRelease
//* Object :
//* Input Parameters : ptmbslFrontEndMutexHandle pMutex
//* Output Parameters : tmErrorCode_t.
//*--------------------------------------------------------------------------------------
tmErrorCode_t UserWrittenMutexRelease(ptmbslFrontEndMutexHandle pMutex)
{
/* Variable declarations */
tmErrorCode_t err = TM_OK;
/* Customer code here */
/* ...*/
/* ...*/
/* End of Customer code here */
return err;
}
#endif
Reference in New Issue View Git Blame Copy Permalink