stabilize hjx9009 qspi cache profile

petalinux-qspi/references/cache-and-delivery.md

@@ -17,7 +17,7 @@ Example:
 
 ```powershell
 python <skill>\scripts\qspi_cache.py capture `
-  --board-profile <skill>\references\hjx9009.md `
+  --board-profile <skill>\references\hjx9009-profile.json `
   --input HDF=<path-to-system.hdf> `
   --input SYSTEM_USER_DTSI=<path-to-system-user.dtsi> `
   --input ROOTFS_CONFIG=<path-to-rootfs-config> `

petalinux-qspi/references/hjx9009-profile.json

@@ -0,0 +1,45 @@
+{
+  "schema_version": 1,
+  "board_id": "hjx9009",
+  "profile_revision": 1,
+  "soc": "XC7Z100FF900",
+  "boot": {
+    "mode_mio_5_4_3": "100",
+    "device": "qspi",
+    "qspi_topology_mio2": 0,
+    "qspi_topology": "dual-cascade",
+    "composition": ["fsbl", "u-boot"]
+  },
+  "qspi": {
+    "family": "S25FL128S",
+    "validated_probe": "s25fl128s_64k",
+    "total_bytes": 33554432,
+    "erase_bytes": 131072,
+    "reported_page_bytes": 512,
+    "partitions": [
+      {"name": "boot", "offset": "0x00000000", "size": "0x00500000"},
+      {"name": "bootenv", "offset": "0x00500000", "size": "0x00020000"},
+      {"name": "kernel", "offset": "0x00520000", "size": "0x01800000"},
+      {"name": "spare", "offset": "0x01D20000", "size": "0x002E0000"}
+    ]
+  },
+  "storage": {
+    "kind": "removable-microsd",
+    "controller": "sd0",
+    "data_mio": [40, 41, 42, 43, 44, 45],
+    "card_detect_mio": 13,
+    "bus_width": 4,
+    "max_frequency_hz": 50000000,
+    "card_voltage_v": 3.3,
+    "ps_voltage_v": 1.8,
+    "supports_uhs_voltage_switch": false,
+    "has_write_protect": false,
+    "disable_sd1": true
+  },
+  "ethernet": {
+    "controller": "gem0",
+    "phy": "Atheros 8031",
+    "mdio_address": 0,
+    "phy_mode": "rgmii-id"
+  }
+}

petalinux-qspi/references/hjx9009.md

@@ -1,6 +1,6 @@
 # HJX9009 validated board profile
 
-This profile comes from the HJX-ADRV9009-X2 schematic and a PetaLinux 2018.1 hardware run. Reconfirm the PCB revision and live probes for every target; schematic constants do not replace target identity.
+This profile comes from the HJX-ADRV9009-X2 schematic and a PetaLinux 2018.1 hardware run. Reconfirm the PCB revision and live probes for every target; schematic constants do not replace target identity. Use [hjx9009-profile.json](hjx9009-profile.json), rather than this explanatory document, as the cache fingerprint's `--board-profile` input so editorial changes do not force a rebuild.
 
 ## Boot and QSPI