1230 lines
56 KiB
Tcl
1230 lines
56 KiB
Tcl
|
|
################################################################
|
|
# This is a generated script based on design: design_1
|
|
#
|
|
# Though there are limitations about the generated script,
|
|
# the main purpose of this utility is to make learning
|
|
# IP Integrator Tcl commands easier.
|
|
################################################################
|
|
|
|
namespace eval _tcl {
|
|
proc get_script_folder {} {
|
|
set script_path [file normalize [info script]]
|
|
set script_folder [file dirname $script_path]
|
|
return $script_folder
|
|
}
|
|
}
|
|
variable script_folder
|
|
set script_folder [_tcl::get_script_folder]
|
|
|
|
################################################################
|
|
# Check if script is running in correct Vivado version.
|
|
################################################################
|
|
set scripts_vivado_version 2018.1
|
|
set current_vivado_version [version -short]
|
|
|
|
if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
|
|
puts ""
|
|
catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
|
|
|
|
return 1
|
|
}
|
|
|
|
################################################################
|
|
# START
|
|
################################################################
|
|
|
|
# To test this script, run the following commands from Vivado Tcl console:
|
|
# source design_1_script.tcl
|
|
|
|
# If there is no project opened, this script will create a
|
|
# project, but make sure you do not have an existing project
|
|
# <./myproj/project_1.xpr> in the current working folder.
|
|
|
|
set list_projs [get_projects -quiet]
|
|
if { $list_projs eq "" } {
|
|
create_project project_1 myproj -part xc7z020clg400-2
|
|
}
|
|
|
|
|
|
# CHANGE DESIGN NAME HERE
|
|
variable design_name
|
|
set design_name design_1
|
|
|
|
# If you do not already have an existing IP Integrator design open,
|
|
# you can create a design using the following command:
|
|
# create_bd_design $design_name
|
|
|
|
# Creating design if needed
|
|
set errMsg ""
|
|
set nRet 0
|
|
|
|
set cur_design [current_bd_design -quiet]
|
|
set list_cells [get_bd_cells -quiet]
|
|
|
|
if { ${design_name} eq "" } {
|
|
# USE CASES:
|
|
# 1) Design_name not set
|
|
|
|
set errMsg "Please set the variable <design_name> to a non-empty value."
|
|
set nRet 1
|
|
|
|
} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
|
|
# USE CASES:
|
|
# 2): Current design opened AND is empty AND names same.
|
|
# 3): Current design opened AND is empty AND names diff; design_name NOT in project.
|
|
# 4): Current design opened AND is empty AND names diff; design_name exists in project.
|
|
|
|
if { $cur_design ne $design_name } {
|
|
common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
|
|
set design_name [get_property NAME $cur_design]
|
|
}
|
|
common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."
|
|
|
|
} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
|
|
# USE CASES:
|
|
# 5) Current design opened AND has components AND same names.
|
|
|
|
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
|
|
set nRet 1
|
|
} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
|
|
# USE CASES:
|
|
# 6) Current opened design, has components, but diff names, design_name exists in project.
|
|
# 7) No opened design, design_name exists in project.
|
|
|
|
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
|
|
set nRet 2
|
|
|
|
} else {
|
|
# USE CASES:
|
|
# 8) No opened design, design_name not in project.
|
|
# 9) Current opened design, has components, but diff names, design_name not in project.
|
|
|
|
common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."
|
|
|
|
create_bd_design $design_name
|
|
|
|
common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
|
|
current_bd_design $design_name
|
|
|
|
}
|
|
|
|
common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."
|
|
|
|
if { $nRet != 0 } {
|
|
catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
|
|
return $nRet
|
|
}
|
|
|
|
set bCheckIPsPassed 1
|
|
##################################################################
|
|
# CHECK IPs
|
|
##################################################################
|
|
set bCheckIPs 1
|
|
if { $bCheckIPs == 1 } {
|
|
set list_check_ips "\
|
|
xilinx.com:ip:axi_dma:7.1\
|
|
xilinx.com:ip:axis_data_fifo:1.1\
|
|
xilinx.com:ip:ila:6.2\
|
|
xilinx.com:ip:proc_sys_reset:5.0\
|
|
xilinx.com:ip:processing_system7:5.5\
|
|
xilinx.com:ip:xlconcat:2.1\
|
|
"
|
|
|
|
set list_ips_missing ""
|
|
common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
|
|
|
|
foreach ip_vlnv $list_check_ips {
|
|
set ip_obj [get_ipdefs -all $ip_vlnv]
|
|
if { $ip_obj eq "" } {
|
|
lappend list_ips_missing $ip_vlnv
|
|
}
|
|
}
|
|
|
|
if { $list_ips_missing ne "" } {
|
|
catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
|
|
set bCheckIPsPassed 0
|
|
}
|
|
|
|
}
|
|
|
|
if { $bCheckIPsPassed != 1 } {
|
|
common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
|
|
return 3
|
|
}
|
|
|
|
##################################################################
|
|
# DESIGN PROCs
|
|
##################################################################
|
|
|
|
|
|
|
|
# Procedure to create entire design; Provide argument to make
|
|
# procedure reusable. If parentCell is "", will use root.
|
|
proc create_root_design { parentCell } {
|
|
|
|
variable script_folder
|
|
variable design_name
|
|
|
|
if { $parentCell eq "" } {
|
|
set parentCell [get_bd_cells /]
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
|
|
# Create interface ports
|
|
set DDR [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR ]
|
|
set FIXED_IO [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 FIXED_IO ]
|
|
set S_AXIS_TS2 [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 S_AXIS_TS2 ]
|
|
set_property -dict [ list \
|
|
CONFIG.FREQ_HZ {50000000} \
|
|
CONFIG.HAS_TKEEP {0} \
|
|
CONFIG.HAS_TLAST {1} \
|
|
CONFIG.HAS_TREADY {1} \
|
|
CONFIG.HAS_TSTRB {0} \
|
|
CONFIG.LAYERED_METADATA {undef} \
|
|
CONFIG.TDATA_NUM_BYTES {4} \
|
|
CONFIG.TDEST_WIDTH {0} \
|
|
CONFIG.TID_WIDTH {0} \
|
|
CONFIG.TUSER_WIDTH {0} \
|
|
] $S_AXIS_TS2
|
|
|
|
# Create ports
|
|
set FCLK_CLK0 [ create_bd_port -dir O -type clk FCLK_CLK0 ]
|
|
set FCLK_RESET0_N [ create_bd_port -dir O -type rst FCLK_RESET0_N ]
|
|
set GPIO_EMIO_gpio_i [ create_bd_port -dir I -from 3 -to 0 GPIO_EMIO_gpio_i ]
|
|
set GPIO_EMIO_gpio_o [ create_bd_port -dir O -from 3 -to 0 GPIO_EMIO_gpio_o ]
|
|
set GPIO_EMIO_gpio_t [ create_bd_port -dir O -from 3 -to 0 GPIO_EMIO_gpio_t ]
|
|
set I2C0_SCL_I [ create_bd_port -dir I I2C0_SCL_I ]
|
|
set I2C0_SCL_O [ create_bd_port -dir O I2C0_SCL_O ]
|
|
set I2C0_SCL_T [ create_bd_port -dir O I2C0_SCL_T ]
|
|
set I2C0_SDA_I [ create_bd_port -dir I I2C0_SDA_I ]
|
|
set I2C0_SDA_O [ create_bd_port -dir O I2C0_SDA_O ]
|
|
set I2C0_SDA_T [ create_bd_port -dir O I2C0_SDA_T ]
|
|
set I2C1_SCL_I [ create_bd_port -dir I I2C1_SCL_I ]
|
|
set I2C1_SCL_O [ create_bd_port -dir O I2C1_SCL_O ]
|
|
set I2C1_SCL_T [ create_bd_port -dir O I2C1_SCL_T ]
|
|
set I2C1_SDA_I [ create_bd_port -dir I I2C1_SDA_I ]
|
|
set I2C1_SDA_O [ create_bd_port -dir O I2C1_SDA_O ]
|
|
set I2C1_SDA_T [ create_bd_port -dir O I2C1_SDA_T ]
|
|
set SPI0_MISO_I [ create_bd_port -dir I SPI0_MISO_I ]
|
|
set SPI0_MOSI_O [ create_bd_port -dir O SPI0_MOSI_O ]
|
|
set SPI0_SCLK_O [ create_bd_port -dir O SPI0_SCLK_O ]
|
|
set SPI0_SS_O [ create_bd_port -dir O SPI0_SS_O ]
|
|
set SPI1_MISO_I [ create_bd_port -dir I SPI1_MISO_I ]
|
|
set SPI1_MOSI_O [ create_bd_port -dir O SPI1_MOSI_O ]
|
|
set SPI1_SCLK_O [ create_bd_port -dir O SPI1_SCLK_O ]
|
|
set SPI1_SS_O [ create_bd_port -dir O SPI1_SS_O ]
|
|
set UART1_RX_I [ create_bd_port -dir I UART1_RX_I ]
|
|
set UART1_TX_O [ create_bd_port -dir O UART1_TX_O ]
|
|
set s_axis_tdata_0 [ create_bd_port -dir I -from 31 -to 0 s_axis_tdata_0 ]
|
|
set s_axis_tlast_0 [ create_bd_port -dir I s_axis_tlast_0 ]
|
|
set s_axis_tready_0 [ create_bd_port -dir O s_axis_tready_0 ]
|
|
set s_axis_tvalid_0 [ create_bd_port -dir I s_axis_tvalid_0 ]
|
|
|
|
# Create instance: axi_dma_0, and set properties
|
|
set axi_dma_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dma:7.1 axi_dma_0 ]
|
|
set_property -dict [ list \
|
|
CONFIG.c_include_mm2s {0} \
|
|
CONFIG.c_include_s2mm_dre {0} \
|
|
CONFIG.c_include_sg {0} \
|
|
CONFIG.c_m_axi_s2mm_data_width {32} \
|
|
CONFIG.c_s2mm_burst_size {256} \
|
|
CONFIG.c_sg_include_stscntrl_strm {0} \
|
|
CONFIG.c_sg_length_width {20} \
|
|
] $axi_dma_0
|
|
|
|
# Create instance: axi_dma_1, and set properties
|
|
set axi_dma_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dma:7.1 axi_dma_1 ]
|
|
set_property -dict [ list \
|
|
CONFIG.c_include_mm2s {0} \
|
|
CONFIG.c_include_s2mm_dre {0} \
|
|
CONFIG.c_include_sg {0} \
|
|
CONFIG.c_m_axi_s2mm_data_width {32} \
|
|
CONFIG.c_s2mm_burst_size {256} \
|
|
CONFIG.c_sg_include_stscntrl_strm {0} \
|
|
CONFIG.c_sg_length_width {20} \
|
|
] $axi_dma_1
|
|
|
|
# Create instance: axi_mem_intercon, and set properties
|
|
set axi_mem_intercon [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_mem_intercon ]
|
|
set_property -dict [ list \
|
|
CONFIG.NUM_MI {1} \
|
|
CONFIG.NUM_SI {1} \
|
|
] $axi_mem_intercon
|
|
|
|
# Create instance: axi_mem_intercon_1, and set properties
|
|
set axi_mem_intercon_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_mem_intercon_1 ]
|
|
set_property -dict [ list \
|
|
CONFIG.NUM_MI {1} \
|
|
] $axi_mem_intercon_1
|
|
|
|
# Create instance: axis_data_fifo_0, and set properties
|
|
set axis_data_fifo_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:1.1 axis_data_fifo_0 ]
|
|
set_property -dict [ list \
|
|
CONFIG.FIFO_DEPTH {32768} \
|
|
CONFIG.HAS_TLAST {1} \
|
|
CONFIG.TDATA_NUM_BYTES {4} \
|
|
] $axis_data_fifo_0
|
|
|
|
# Create instance: axis_data_fifo_1, and set properties
|
|
set axis_data_fifo_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:1.1 axis_data_fifo_1 ]
|
|
set_property -dict [ list \
|
|
CONFIG.FIFO_DEPTH {32768} \
|
|
CONFIG.HAS_TLAST {1} \
|
|
CONFIG.TDATA_NUM_BYTES {4} \
|
|
] $axis_data_fifo_1
|
|
|
|
# Create instance: ila_1, and set properties
|
|
set ila_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:ila:6.2 ila_1 ]
|
|
set_property -dict [ list \
|
|
CONFIG.ALL_PROBE_SAME_MU_CNT {2} \
|
|
CONFIG.C_ADV_TRIGGER {true} \
|
|
CONFIG.C_DATA_DEPTH {1024} \
|
|
CONFIG.C_ENABLE_ILA_AXI_MON {false} \
|
|
CONFIG.C_EN_STRG_QUAL {1} \
|
|
CONFIG.C_MONITOR_TYPE {Native} \
|
|
CONFIG.C_NUM_OF_PROBES {7} \
|
|
CONFIG.C_PROBE0_MU_CNT {2} \
|
|
CONFIG.C_PROBE0_WIDTH {32} \
|
|
CONFIG.C_PROBE1_MU_CNT {2} \
|
|
CONFIG.C_PROBE1_WIDTH {1} \
|
|
CONFIG.C_PROBE2_MU_CNT {2} \
|
|
CONFIG.C_PROBE2_WIDTH {1} \
|
|
CONFIG.C_PROBE3_MU_CNT {2} \
|
|
CONFIG.C_PROBE3_WIDTH {1} \
|
|
CONFIG.C_PROBE4_MU_CNT {2} \
|
|
CONFIG.C_PROBE4_WIDTH {32} \
|
|
CONFIG.C_PROBE5_MU_CNT {2} \
|
|
CONFIG.C_PROBE5_WIDTH {32} \
|
|
CONFIG.C_PROBE6_MU_CNT {2} \
|
|
CONFIG.C_PROBE6_WIDTH {32} \
|
|
CONFIG.C_PROBE7_MU_CNT {2} \
|
|
] $ila_1
|
|
|
|
# Create instance: proc_sys_reset_0, and set properties
|
|
set proc_sys_reset_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 proc_sys_reset_0 ]
|
|
|
|
# Create instance: processing_system7_0, and set properties
|
|
set processing_system7_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:processing_system7:5.5 processing_system7_0 ]
|
|
set_property -dict [ list \
|
|
CONFIG.PCW_ACT_APU_PERIPHERAL_FREQMHZ {666.666687} \
|
|
CONFIG.PCW_ACT_CAN0_PERIPHERAL_FREQMHZ {23.8095} \
|
|
CONFIG.PCW_ACT_CAN1_PERIPHERAL_FREQMHZ {23.8095} \
|
|
CONFIG.PCW_ACT_CAN_PERIPHERAL_FREQMHZ {10.000000} \
|
|
CONFIG.PCW_ACT_DCI_PERIPHERAL_FREQMHZ {10.158730} \
|
|
CONFIG.PCW_ACT_ENET0_PERIPHERAL_FREQMHZ {125.000000} \
|
|
CONFIG.PCW_ACT_ENET1_PERIPHERAL_FREQMHZ {10.000000} \
|
|
CONFIG.PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ {50.000000} \
|
|
CONFIG.PCW_ACT_FPGA1_PERIPHERAL_FREQMHZ {10.000000} \
|
|
CONFIG.PCW_ACT_FPGA2_PERIPHERAL_FREQMHZ {10.000000} \
|
|
CONFIG.PCW_ACT_FPGA3_PERIPHERAL_FREQMHZ {10.000000} \
|
|
CONFIG.PCW_ACT_I2C_PERIPHERAL_FREQMHZ {50} \
|
|
CONFIG.PCW_ACT_PCAP_PERIPHERAL_FREQMHZ {200.000000} \
|
|
CONFIG.PCW_ACT_QSPI_PERIPHERAL_FREQMHZ {200.000000} \
|
|
CONFIG.PCW_ACT_SDIO_PERIPHERAL_FREQMHZ {100.000000} \
|
|
CONFIG.PCW_ACT_SMC_PERIPHERAL_FREQMHZ {10.000000} \
|
|
CONFIG.PCW_ACT_SPI_PERIPHERAL_FREQMHZ {166.666672} \
|
|
CONFIG.PCW_ACT_TPIU_PERIPHERAL_FREQMHZ {200.000000} \
|
|
CONFIG.PCW_ACT_TTC0_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_ACT_TTC0_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_ACT_TTC0_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_ACT_TTC1_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_ACT_TTC1_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_ACT_TTC1_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_ACT_TTC_PERIPHERAL_FREQMHZ {50} \
|
|
CONFIG.PCW_ACT_UART_PERIPHERAL_FREQMHZ {100.000000} \
|
|
CONFIG.PCW_ACT_USB0_PERIPHERAL_FREQMHZ {60} \
|
|
CONFIG.PCW_ACT_USB1_PERIPHERAL_FREQMHZ {60} \
|
|
CONFIG.PCW_ACT_WDT_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_APU_CLK_RATIO_ENABLE {6:2:1} \
|
|
CONFIG.PCW_APU_PERIPHERAL_FREQMHZ {666.666666} \
|
|
CONFIG.PCW_ARMPLL_CTRL_FBDIV {40} \
|
|
CONFIG.PCW_CAN0_BASEADDR {0xE0008000} \
|
|
CONFIG.PCW_CAN0_GRP_CLK_ENABLE {0} \
|
|
CONFIG.PCW_CAN0_HIGHADDR {0xE0008FFF} \
|
|
CONFIG.PCW_CAN0_PERIPHERAL_CLKSRC {External} \
|
|
CONFIG.PCW_CAN0_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_CAN0_PERIPHERAL_FREQMHZ {-1} \
|
|
CONFIG.PCW_CAN1_BASEADDR {0xE0009000} \
|
|
CONFIG.PCW_CAN1_GRP_CLK_ENABLE {0} \
|
|
CONFIG.PCW_CAN1_HIGHADDR {0xE0009FFF} \
|
|
CONFIG.PCW_CAN1_PERIPHERAL_CLKSRC {External} \
|
|
CONFIG.PCW_CAN1_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_CAN1_PERIPHERAL_FREQMHZ {-1} \
|
|
CONFIG.PCW_CAN_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_CAN_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_CAN_PERIPHERAL_DIVISOR1 {1} \
|
|
CONFIG.PCW_CAN_PERIPHERAL_FREQMHZ {100} \
|
|
CONFIG.PCW_CAN_PERIPHERAL_VALID {0} \
|
|
CONFIG.PCW_CLK0_FREQ {50000000} \
|
|
CONFIG.PCW_CLK1_FREQ {10000000} \
|
|
CONFIG.PCW_CLK2_FREQ {10000000} \
|
|
CONFIG.PCW_CLK3_FREQ {10000000} \
|
|
CONFIG.PCW_CORE0_FIQ_INTR {0} \
|
|
CONFIG.PCW_CORE0_IRQ_INTR {0} \
|
|
CONFIG.PCW_CORE1_FIQ_INTR {0} \
|
|
CONFIG.PCW_CORE1_IRQ_INTR {0} \
|
|
CONFIG.PCW_CPU_CPU_6X4X_MAX_RANGE {767} \
|
|
CONFIG.PCW_CPU_CPU_PLL_FREQMHZ {1333.333} \
|
|
CONFIG.PCW_CPU_PERIPHERAL_CLKSRC {ARM PLL} \
|
|
CONFIG.PCW_CPU_PERIPHERAL_DIVISOR0 {2} \
|
|
CONFIG.PCW_CRYSTAL_PERIPHERAL_FREQMHZ {33.333333} \
|
|
CONFIG.PCW_DCI_PERIPHERAL_CLKSRC {DDR PLL} \
|
|
CONFIG.PCW_DCI_PERIPHERAL_DIVISOR0 {15} \
|
|
CONFIG.PCW_DCI_PERIPHERAL_DIVISOR1 {7} \
|
|
CONFIG.PCW_DCI_PERIPHERAL_FREQMHZ {10.159} \
|
|
CONFIG.PCW_DDRPLL_CTRL_FBDIV {32} \
|
|
CONFIG.PCW_DDR_DDR_PLL_FREQMHZ {1066.667} \
|
|
CONFIG.PCW_DDR_HPRLPR_QUEUE_PARTITION {HPR(0)/LPR(32)} \
|
|
CONFIG.PCW_DDR_HPR_TO_CRITICAL_PRIORITY_LEVEL {15} \
|
|
CONFIG.PCW_DDR_LPR_TO_CRITICAL_PRIORITY_LEVEL {2} \
|
|
CONFIG.PCW_DDR_PERIPHERAL_CLKSRC {DDR PLL} \
|
|
CONFIG.PCW_DDR_PERIPHERAL_DIVISOR0 {4} \
|
|
CONFIG.PCW_DDR_PORT0_HPR_ENABLE {0} \
|
|
CONFIG.PCW_DDR_PORT1_HPR_ENABLE {0} \
|
|
CONFIG.PCW_DDR_PORT2_HPR_ENABLE {0} \
|
|
CONFIG.PCW_DDR_PORT3_HPR_ENABLE {0} \
|
|
CONFIG.PCW_DDR_RAM_BASEADDR {0x00100000} \
|
|
CONFIG.PCW_DDR_RAM_HIGHADDR {0x3FFFFFFF} \
|
|
CONFIG.PCW_DDR_WRITE_TO_CRITICAL_PRIORITY_LEVEL {2} \
|
|
CONFIG.PCW_DM_WIDTH {4} \
|
|
CONFIG.PCW_DQS_WIDTH {4} \
|
|
CONFIG.PCW_DQ_WIDTH {32} \
|
|
CONFIG.PCW_ENET0_BASEADDR {0xE000B000} \
|
|
CONFIG.PCW_ENET0_ENET0_IO {MIO 16 .. 27} \
|
|
CONFIG.PCW_ENET0_GRP_MDIO_ENABLE {1} \
|
|
CONFIG.PCW_ENET0_GRP_MDIO_IO {MIO 52 .. 53} \
|
|
CONFIG.PCW_ENET0_HIGHADDR {0xE000BFFF} \
|
|
CONFIG.PCW_ENET0_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR0 {8} \
|
|
CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR1 {1} \
|
|
CONFIG.PCW_ENET0_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_ENET0_PERIPHERAL_FREQMHZ {1000 Mbps} \
|
|
CONFIG.PCW_ENET0_RESET_ENABLE {0} \
|
|
CONFIG.PCW_ENET1_BASEADDR {0xE000C000} \
|
|
CONFIG.PCW_ENET1_GRP_MDIO_ENABLE {0} \
|
|
CONFIG.PCW_ENET1_HIGHADDR {0xE000CFFF} \
|
|
CONFIG.PCW_ENET1_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR1 {1} \
|
|
CONFIG.PCW_ENET1_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_ENET1_PERIPHERAL_FREQMHZ {1000 Mbps} \
|
|
CONFIG.PCW_ENET1_RESET_ENABLE {0} \
|
|
CONFIG.PCW_ENET_RESET_ENABLE {0} \
|
|
CONFIG.PCW_ENET_RESET_POLARITY {Active Low} \
|
|
CONFIG.PCW_EN_4K_TIMER {0} \
|
|
CONFIG.PCW_EN_CAN0 {0} \
|
|
CONFIG.PCW_EN_CAN1 {0} \
|
|
CONFIG.PCW_EN_CLK0_PORT {1} \
|
|
CONFIG.PCW_EN_CLK1_PORT {0} \
|
|
CONFIG.PCW_EN_CLK2_PORT {0} \
|
|
CONFIG.PCW_EN_CLK3_PORT {0} \
|
|
CONFIG.PCW_EN_CLKTRIG0_PORT {0} \
|
|
CONFIG.PCW_EN_CLKTRIG1_PORT {0} \
|
|
CONFIG.PCW_EN_CLKTRIG2_PORT {0} \
|
|
CONFIG.PCW_EN_CLKTRIG3_PORT {0} \
|
|
CONFIG.PCW_EN_DDR {1} \
|
|
CONFIG.PCW_EN_EMIO_CAN0 {0} \
|
|
CONFIG.PCW_EN_EMIO_CAN1 {0} \
|
|
CONFIG.PCW_EN_EMIO_CD_SDIO0 {0} \
|
|
CONFIG.PCW_EN_EMIO_CD_SDIO1 {0} \
|
|
CONFIG.PCW_EN_EMIO_ENET0 {0} \
|
|
CONFIG.PCW_EN_EMIO_ENET1 {0} \
|
|
CONFIG.PCW_EN_EMIO_GPIO {1} \
|
|
CONFIG.PCW_EN_EMIO_I2C0 {1} \
|
|
CONFIG.PCW_EN_EMIO_I2C1 {1} \
|
|
CONFIG.PCW_EN_EMIO_MODEM_UART0 {0} \
|
|
CONFIG.PCW_EN_EMIO_MODEM_UART1 {0} \
|
|
CONFIG.PCW_EN_EMIO_PJTAG {0} \
|
|
CONFIG.PCW_EN_EMIO_SDIO0 {0} \
|
|
CONFIG.PCW_EN_EMIO_SDIO1 {0} \
|
|
CONFIG.PCW_EN_EMIO_SPI0 {1} \
|
|
CONFIG.PCW_EN_EMIO_SPI1 {1} \
|
|
CONFIG.PCW_EN_EMIO_SRAM_INT {0} \
|
|
CONFIG.PCW_EN_EMIO_TRACE {0} \
|
|
CONFIG.PCW_EN_EMIO_TTC0 {0} \
|
|
CONFIG.PCW_EN_EMIO_TTC1 {0} \
|
|
CONFIG.PCW_EN_EMIO_UART0 {0} \
|
|
CONFIG.PCW_EN_EMIO_UART1 {1} \
|
|
CONFIG.PCW_EN_EMIO_WDT {0} \
|
|
CONFIG.PCW_EN_EMIO_WP_SDIO0 {0} \
|
|
CONFIG.PCW_EN_EMIO_WP_SDIO1 {0} \
|
|
CONFIG.PCW_EN_ENET0 {1} \
|
|
CONFIG.PCW_EN_ENET1 {0} \
|
|
CONFIG.PCW_EN_GPIO {1} \
|
|
CONFIG.PCW_EN_I2C0 {1} \
|
|
CONFIG.PCW_EN_I2C1 {1} \
|
|
CONFIG.PCW_EN_MODEM_UART0 {0} \
|
|
CONFIG.PCW_EN_MODEM_UART1 {0} \
|
|
CONFIG.PCW_EN_PJTAG {0} \
|
|
CONFIG.PCW_EN_PTP_ENET0 {0} \
|
|
CONFIG.PCW_EN_PTP_ENET1 {0} \
|
|
CONFIG.PCW_EN_QSPI {1} \
|
|
CONFIG.PCW_EN_RST0_PORT {1} \
|
|
CONFIG.PCW_EN_RST1_PORT {0} \
|
|
CONFIG.PCW_EN_RST2_PORT {0} \
|
|
CONFIG.PCW_EN_RST3_PORT {0} \
|
|
CONFIG.PCW_EN_SDIO0 {1} \
|
|
CONFIG.PCW_EN_SDIO1 {1} \
|
|
CONFIG.PCW_EN_SMC {0} \
|
|
CONFIG.PCW_EN_SPI0 {1} \
|
|
CONFIG.PCW_EN_SPI1 {1} \
|
|
CONFIG.PCW_EN_TRACE {0} \
|
|
CONFIG.PCW_EN_TTC0 {0} \
|
|
CONFIG.PCW_EN_TTC1 {0} \
|
|
CONFIG.PCW_EN_UART0 {1} \
|
|
CONFIG.PCW_EN_UART1 {1} \
|
|
CONFIG.PCW_EN_USB0 {0} \
|
|
CONFIG.PCW_EN_USB1 {0} \
|
|
CONFIG.PCW_EN_WDT {0} \
|
|
CONFIG.PCW_FCLK0_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR0 {5} \
|
|
CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR1 {4} \
|
|
CONFIG.PCW_FCLK1_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR1 {1} \
|
|
CONFIG.PCW_FCLK2_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR1 {1} \
|
|
CONFIG.PCW_FCLK3_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR1 {1} \
|
|
CONFIG.PCW_FCLK_CLK0_BUF {TRUE} \
|
|
CONFIG.PCW_FCLK_CLK1_BUF {FALSE} \
|
|
CONFIG.PCW_FCLK_CLK2_BUF {FALSE} \
|
|
CONFIG.PCW_FCLK_CLK3_BUF {FALSE} \
|
|
CONFIG.PCW_FPGA0_PERIPHERAL_FREQMHZ {50} \
|
|
CONFIG.PCW_FPGA1_PERIPHERAL_FREQMHZ {50} \
|
|
CONFIG.PCW_FPGA2_PERIPHERAL_FREQMHZ {50} \
|
|
CONFIG.PCW_FPGA3_PERIPHERAL_FREQMHZ {50} \
|
|
CONFIG.PCW_FPGA_FCLK0_ENABLE {1} \
|
|
CONFIG.PCW_FPGA_FCLK1_ENABLE {0} \
|
|
CONFIG.PCW_FPGA_FCLK2_ENABLE {0} \
|
|
CONFIG.PCW_FPGA_FCLK3_ENABLE {0} \
|
|
CONFIG.PCW_FTM_CTI_IN0 {<Select>} \
|
|
CONFIG.PCW_FTM_CTI_IN1 {<Select>} \
|
|
CONFIG.PCW_FTM_CTI_IN2 {<Select>} \
|
|
CONFIG.PCW_FTM_CTI_IN3 {<Select>} \
|
|
CONFIG.PCW_FTM_CTI_OUT0 {<Select>} \
|
|
CONFIG.PCW_FTM_CTI_OUT1 {<Select>} \
|
|
CONFIG.PCW_FTM_CTI_OUT2 {<Select>} \
|
|
CONFIG.PCW_FTM_CTI_OUT3 {<Select>} \
|
|
CONFIG.PCW_GP0_EN_MODIFIABLE_TXN {1} \
|
|
CONFIG.PCW_GP0_NUM_READ_THREADS {4} \
|
|
CONFIG.PCW_GP0_NUM_WRITE_THREADS {4} \
|
|
CONFIG.PCW_GP1_EN_MODIFIABLE_TXN {1} \
|
|
CONFIG.PCW_GP1_NUM_READ_THREADS {4} \
|
|
CONFIG.PCW_GP1_NUM_WRITE_THREADS {4} \
|
|
CONFIG.PCW_GPIO_BASEADDR {0xE000A000} \
|
|
CONFIG.PCW_GPIO_EMIO_GPIO_ENABLE {1} \
|
|
CONFIG.PCW_GPIO_EMIO_GPIO_IO {4} \
|
|
CONFIG.PCW_GPIO_EMIO_GPIO_WIDTH {4} \
|
|
CONFIG.PCW_GPIO_HIGHADDR {0xE000AFFF} \
|
|
CONFIG.PCW_GPIO_MIO_GPIO_ENABLE {1} \
|
|
CONFIG.PCW_GPIO_MIO_GPIO_IO {MIO} \
|
|
CONFIG.PCW_GPIO_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_I2C0_BASEADDR {0xE0004000} \
|
|
CONFIG.PCW_I2C0_GRP_INT_ENABLE {1} \
|
|
CONFIG.PCW_I2C0_GRP_INT_IO {EMIO} \
|
|
CONFIG.PCW_I2C0_HIGHADDR {0xE0004FFF} \
|
|
CONFIG.PCW_I2C0_I2C0_IO {EMIO} \
|
|
CONFIG.PCW_I2C0_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_I2C0_RESET_ENABLE {0} \
|
|
CONFIG.PCW_I2C1_BASEADDR {0xE0005000} \
|
|
CONFIG.PCW_I2C1_GRP_INT_ENABLE {1} \
|
|
CONFIG.PCW_I2C1_GRP_INT_IO {EMIO} \
|
|
CONFIG.PCW_I2C1_HIGHADDR {0xE0005FFF} \
|
|
CONFIG.PCW_I2C1_I2C1_IO {EMIO} \
|
|
CONFIG.PCW_I2C1_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_I2C1_RESET_ENABLE {0} \
|
|
CONFIG.PCW_I2C_PERIPHERAL_FREQMHZ {111.111115} \
|
|
CONFIG.PCW_I2C_RESET_ENABLE {0} \
|
|
CONFIG.PCW_I2C_RESET_POLARITY {Active Low} \
|
|
CONFIG.PCW_IMPORT_BOARD_PRESET {None} \
|
|
CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK {0} \
|
|
CONFIG.PCW_INCLUDE_TRACE_BUFFER {0} \
|
|
CONFIG.PCW_IOPLL_CTRL_FBDIV {30} \
|
|
CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} \
|
|
CONFIG.PCW_IRQ_F2P_INTR {1} \
|
|
CONFIG.PCW_IRQ_F2P_MODE {DIRECT} \
|
|
CONFIG.PCW_MIO_0_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_0_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_0_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_0_SLEW {slow} \
|
|
CONFIG.PCW_MIO_10_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_10_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_10_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_10_SLEW {slow} \
|
|
CONFIG.PCW_MIO_11_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_11_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_11_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_11_SLEW {slow} \
|
|
CONFIG.PCW_MIO_12_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_12_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_12_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_12_SLEW {slow} \
|
|
CONFIG.PCW_MIO_13_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_13_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_13_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_13_SLEW {slow} \
|
|
CONFIG.PCW_MIO_14_DIRECTION {in} \
|
|
CONFIG.PCW_MIO_14_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_14_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_14_SLEW {slow} \
|
|
CONFIG.PCW_MIO_15_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_15_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_15_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_15_SLEW {slow} \
|
|
CONFIG.PCW_MIO_16_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_16_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_16_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_16_SLEW {fast} \
|
|
CONFIG.PCW_MIO_17_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_17_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_17_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_17_SLEW {fast} \
|
|
CONFIG.PCW_MIO_18_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_18_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_18_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_18_SLEW {fast} \
|
|
CONFIG.PCW_MIO_19_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_19_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_19_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_19_SLEW {fast} \
|
|
CONFIG.PCW_MIO_1_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_1_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_1_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_1_SLEW {slow} \
|
|
CONFIG.PCW_MIO_20_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_20_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_20_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_20_SLEW {fast} \
|
|
CONFIG.PCW_MIO_21_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_21_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_21_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_21_SLEW {fast} \
|
|
CONFIG.PCW_MIO_22_DIRECTION {in} \
|
|
CONFIG.PCW_MIO_22_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_22_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_22_SLEW {fast} \
|
|
CONFIG.PCW_MIO_23_DIRECTION {in} \
|
|
CONFIG.PCW_MIO_23_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_23_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_23_SLEW {fast} \
|
|
CONFIG.PCW_MIO_24_DIRECTION {in} \
|
|
CONFIG.PCW_MIO_24_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_24_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_24_SLEW {fast} \
|
|
CONFIG.PCW_MIO_25_DIRECTION {in} \
|
|
CONFIG.PCW_MIO_25_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_25_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_25_SLEW {fast} \
|
|
CONFIG.PCW_MIO_26_DIRECTION {in} \
|
|
CONFIG.PCW_MIO_26_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_26_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_26_SLEW {fast} \
|
|
CONFIG.PCW_MIO_27_DIRECTION {in} \
|
|
CONFIG.PCW_MIO_27_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_27_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_27_SLEW {fast} \
|
|
CONFIG.PCW_MIO_28_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_28_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_28_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_28_SLEW {slow} \
|
|
CONFIG.PCW_MIO_29_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_29_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_29_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_29_SLEW {slow} \
|
|
CONFIG.PCW_MIO_2_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_2_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_2_PULLUP {disabled} \
|
|
CONFIG.PCW_MIO_2_SLEW {slow} \
|
|
CONFIG.PCW_MIO_30_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_30_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_30_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_30_SLEW {slow} \
|
|
CONFIG.PCW_MIO_31_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_31_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_31_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_31_SLEW {slow} \
|
|
CONFIG.PCW_MIO_32_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_32_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_32_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_32_SLEW {slow} \
|
|
CONFIG.PCW_MIO_33_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_33_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_33_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_33_SLEW {slow} \
|
|
CONFIG.PCW_MIO_34_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_34_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_34_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_34_SLEW {slow} \
|
|
CONFIG.PCW_MIO_35_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_35_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_35_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_35_SLEW {slow} \
|
|
CONFIG.PCW_MIO_36_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_36_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_36_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_36_SLEW {slow} \
|
|
CONFIG.PCW_MIO_37_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_37_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_37_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_37_SLEW {slow} \
|
|
CONFIG.PCW_MIO_38_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_38_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_38_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_38_SLEW {slow} \
|
|
CONFIG.PCW_MIO_39_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_39_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_39_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_39_SLEW {slow} \
|
|
CONFIG.PCW_MIO_3_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_3_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_3_PULLUP {disabled} \
|
|
CONFIG.PCW_MIO_3_SLEW {slow} \
|
|
CONFIG.PCW_MIO_40_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_40_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_40_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_40_SLEW {slow} \
|
|
CONFIG.PCW_MIO_41_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_41_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_41_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_41_SLEW {slow} \
|
|
CONFIG.PCW_MIO_42_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_42_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_42_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_42_SLEW {slow} \
|
|
CONFIG.PCW_MIO_43_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_43_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_43_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_43_SLEW {slow} \
|
|
CONFIG.PCW_MIO_44_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_44_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_44_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_44_SLEW {slow} \
|
|
CONFIG.PCW_MIO_45_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_45_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_45_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_45_SLEW {slow} \
|
|
CONFIG.PCW_MIO_46_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_46_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_46_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_46_SLEW {slow} \
|
|
CONFIG.PCW_MIO_47_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_47_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_47_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_47_SLEW {slow} \
|
|
CONFIG.PCW_MIO_48_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_48_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_48_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_48_SLEW {slow} \
|
|
CONFIG.PCW_MIO_49_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_49_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_49_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_49_SLEW {slow} \
|
|
CONFIG.PCW_MIO_4_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_4_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_4_PULLUP {disabled} \
|
|
CONFIG.PCW_MIO_4_SLEW {slow} \
|
|
CONFIG.PCW_MIO_50_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_50_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_50_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_50_SLEW {slow} \
|
|
CONFIG.PCW_MIO_51_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_51_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_51_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_51_SLEW {slow} \
|
|
CONFIG.PCW_MIO_52_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_52_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_52_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_52_SLEW {fast} \
|
|
CONFIG.PCW_MIO_53_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_53_IOTYPE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_MIO_53_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_53_SLEW {fast} \
|
|
CONFIG.PCW_MIO_5_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_5_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_5_PULLUP {disabled} \
|
|
CONFIG.PCW_MIO_5_SLEW {slow} \
|
|
CONFIG.PCW_MIO_6_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_6_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_6_PULLUP {disabled} \
|
|
CONFIG.PCW_MIO_6_SLEW {slow} \
|
|
CONFIG.PCW_MIO_7_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_7_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_7_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_7_SLEW {slow} \
|
|
CONFIG.PCW_MIO_8_DIRECTION {out} \
|
|
CONFIG.PCW_MIO_8_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_8_PULLUP {disabled} \
|
|
CONFIG.PCW_MIO_8_SLEW {slow} \
|
|
CONFIG.PCW_MIO_9_DIRECTION {inout} \
|
|
CONFIG.PCW_MIO_9_IOTYPE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_MIO_9_PULLUP {enabled} \
|
|
CONFIG.PCW_MIO_9_SLEW {slow} \
|
|
CONFIG.PCW_MIO_PRIMITIVE {54} \
|
|
CONFIG.PCW_MIO_TREE_PERIPHERALS {GPIO#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#UART 0#UART 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#SD 0#SD 0#SD 0#SD 0#SD 0#SD 0#SD 1#SD 1#SD 1#SD 1#SD 1#SD 1#Enet 0#Enet 0} \
|
|
CONFIG.PCW_MIO_TREE_SIGNALS {gpio[0]#qspi0_ss_b#qspi0_io[0]#qspi0_io[1]#qspi0_io[2]#qspi0_io[3]/HOLD_B#qspi0_sclk#gpio[7]#gpio[8]#gpio[9]#gpio[10]#gpio[11]#gpio[12]#gpio[13]#rx#tx#tx_clk#txd[0]#txd[1]#txd[2]#txd[3]#tx_ctl#rx_clk#rxd[0]#rxd[1]#rxd[2]#rxd[3]#rx_ctl#gpio[28]#gpio[29]#gpio[30]#gpio[31]#gpio[32]#gpio[33]#gpio[34]#gpio[35]#gpio[36]#gpio[37]#gpio[38]#gpio[39]#clk#cmd#data[0]#data[1]#data[2]#data[3]#data[0]#cmd#clk#data[1]#data[2]#data[3]#mdc#mdio} \
|
|
CONFIG.PCW_M_AXI_GP0_ENABLE_STATIC_REMAP {0} \
|
|
CONFIG.PCW_M_AXI_GP0_ID_WIDTH {12} \
|
|
CONFIG.PCW_M_AXI_GP0_SUPPORT_NARROW_BURST {0} \
|
|
CONFIG.PCW_M_AXI_GP0_THREAD_ID_WIDTH {12} \
|
|
CONFIG.PCW_M_AXI_GP1_ENABLE_STATIC_REMAP {0} \
|
|
CONFIG.PCW_M_AXI_GP1_ID_WIDTH {12} \
|
|
CONFIG.PCW_M_AXI_GP1_SUPPORT_NARROW_BURST {0} \
|
|
CONFIG.PCW_M_AXI_GP1_THREAD_ID_WIDTH {12} \
|
|
CONFIG.PCW_NAND_CYCLES_T_AR {1} \
|
|
CONFIG.PCW_NAND_CYCLES_T_CLR {1} \
|
|
CONFIG.PCW_NAND_CYCLES_T_RC {11} \
|
|
CONFIG.PCW_NAND_CYCLES_T_REA {1} \
|
|
CONFIG.PCW_NAND_CYCLES_T_RR {1} \
|
|
CONFIG.PCW_NAND_CYCLES_T_WC {11} \
|
|
CONFIG.PCW_NAND_CYCLES_T_WP {1} \
|
|
CONFIG.PCW_NAND_GRP_D8_ENABLE {0} \
|
|
CONFIG.PCW_NAND_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_NOR_CS0_T_CEOE {1} \
|
|
CONFIG.PCW_NOR_CS0_T_PC {1} \
|
|
CONFIG.PCW_NOR_CS0_T_RC {11} \
|
|
CONFIG.PCW_NOR_CS0_T_TR {1} \
|
|
CONFIG.PCW_NOR_CS0_T_WC {11} \
|
|
CONFIG.PCW_NOR_CS0_T_WP {1} \
|
|
CONFIG.PCW_NOR_CS0_WE_TIME {0} \
|
|
CONFIG.PCW_NOR_CS1_T_CEOE {1} \
|
|
CONFIG.PCW_NOR_CS1_T_PC {1} \
|
|
CONFIG.PCW_NOR_CS1_T_RC {11} \
|
|
CONFIG.PCW_NOR_CS1_T_TR {1} \
|
|
CONFIG.PCW_NOR_CS1_T_WC {11} \
|
|
CONFIG.PCW_NOR_CS1_T_WP {1} \
|
|
CONFIG.PCW_NOR_CS1_WE_TIME {0} \
|
|
CONFIG.PCW_NOR_GRP_A25_ENABLE {0} \
|
|
CONFIG.PCW_NOR_GRP_CS0_ENABLE {0} \
|
|
CONFIG.PCW_NOR_GRP_CS1_ENABLE {0} \
|
|
CONFIG.PCW_NOR_GRP_SRAM_CS0_ENABLE {0} \
|
|
CONFIG.PCW_NOR_GRP_SRAM_CS1_ENABLE {0} \
|
|
CONFIG.PCW_NOR_GRP_SRAM_INT_ENABLE {0} \
|
|
CONFIG.PCW_NOR_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_NOR_SRAM_CS0_T_CEOE {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS0_T_PC {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS0_T_RC {11} \
|
|
CONFIG.PCW_NOR_SRAM_CS0_T_TR {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS0_T_WC {11} \
|
|
CONFIG.PCW_NOR_SRAM_CS0_T_WP {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS0_WE_TIME {0} \
|
|
CONFIG.PCW_NOR_SRAM_CS1_T_CEOE {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS1_T_PC {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS1_T_RC {11} \
|
|
CONFIG.PCW_NOR_SRAM_CS1_T_TR {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS1_T_WC {11} \
|
|
CONFIG.PCW_NOR_SRAM_CS1_T_WP {1} \
|
|
CONFIG.PCW_NOR_SRAM_CS1_WE_TIME {0} \
|
|
CONFIG.PCW_OVERRIDE_BASIC_CLOCK {0} \
|
|
CONFIG.PCW_P2F_CAN0_INTR {0} \
|
|
CONFIG.PCW_P2F_CAN1_INTR {0} \
|
|
CONFIG.PCW_P2F_CTI_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC0_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC1_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC2_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC3_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC4_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC5_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC6_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC7_INTR {0} \
|
|
CONFIG.PCW_P2F_DMAC_ABORT_INTR {0} \
|
|
CONFIG.PCW_P2F_ENET0_INTR {0} \
|
|
CONFIG.PCW_P2F_ENET1_INTR {0} \
|
|
CONFIG.PCW_P2F_GPIO_INTR {0} \
|
|
CONFIG.PCW_P2F_I2C0_INTR {0} \
|
|
CONFIG.PCW_P2F_I2C1_INTR {0} \
|
|
CONFIG.PCW_P2F_QSPI_INTR {0} \
|
|
CONFIG.PCW_P2F_SDIO0_INTR {0} \
|
|
CONFIG.PCW_P2F_SDIO1_INTR {0} \
|
|
CONFIG.PCW_P2F_SMC_INTR {0} \
|
|
CONFIG.PCW_P2F_SPI0_INTR {0} \
|
|
CONFIG.PCW_P2F_SPI1_INTR {0} \
|
|
CONFIG.PCW_P2F_UART0_INTR {0} \
|
|
CONFIG.PCW_P2F_UART1_INTR {0} \
|
|
CONFIG.PCW_P2F_USB0_INTR {0} \
|
|
CONFIG.PCW_P2F_USB1_INTR {0} \
|
|
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY0 {0.089} \
|
|
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY1 {0.075} \
|
|
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY2 {0.085} \
|
|
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY3 {0.092} \
|
|
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_0 {-0.025} \
|
|
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_1 {0.014} \
|
|
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_2 {-0.009} \
|
|
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_3 {-0.033} \
|
|
CONFIG.PCW_PACKAGE_NAME {clg400} \
|
|
CONFIG.PCW_PCAP_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_PCAP_PERIPHERAL_DIVISOR0 {5} \
|
|
CONFIG.PCW_PCAP_PERIPHERAL_FREQMHZ {200} \
|
|
CONFIG.PCW_PERIPHERAL_BOARD_PRESET {None} \
|
|
CONFIG.PCW_PJTAG_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_PLL_BYPASSMODE_ENABLE {0} \
|
|
CONFIG.PCW_PRESET_BANK0_VOLTAGE {LVCMOS 3.3V} \
|
|
CONFIG.PCW_PRESET_BANK1_VOLTAGE {LVCMOS 1.8V} \
|
|
CONFIG.PCW_PS7_SI_REV {PRODUCTION} \
|
|
CONFIG.PCW_QSPI_GRP_FBCLK_ENABLE {0} \
|
|
CONFIG.PCW_QSPI_GRP_IO1_ENABLE {0} \
|
|
CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE {1} \
|
|
CONFIG.PCW_QSPI_GRP_SINGLE_SS_IO {MIO 1 .. 6} \
|
|
CONFIG.PCW_QSPI_GRP_SS1_ENABLE {0} \
|
|
CONFIG.PCW_QSPI_INTERNAL_HIGHADDRESS {0xFCFFFFFF} \
|
|
CONFIG.PCW_QSPI_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_QSPI_PERIPHERAL_DIVISOR0 {5} \
|
|
CONFIG.PCW_QSPI_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_QSPI_PERIPHERAL_FREQMHZ {200} \
|
|
CONFIG.PCW_QSPI_QSPI_IO {MIO 1 .. 6} \
|
|
CONFIG.PCW_SD0_GRP_CD_ENABLE {0} \
|
|
CONFIG.PCW_SD0_GRP_POW_ENABLE {0} \
|
|
CONFIG.PCW_SD0_GRP_WP_ENABLE {0} \
|
|
CONFIG.PCW_SD0_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_SD0_SD0_IO {MIO 40 .. 45} \
|
|
CONFIG.PCW_SD1_GRP_CD_ENABLE {0} \
|
|
CONFIG.PCW_SD1_GRP_POW_ENABLE {0} \
|
|
CONFIG.PCW_SD1_GRP_WP_ENABLE {0} \
|
|
CONFIG.PCW_SD1_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_SD1_SD1_IO {MIO 46 .. 51} \
|
|
CONFIG.PCW_SDIO0_BASEADDR {0xE0100000} \
|
|
CONFIG.PCW_SDIO0_HIGHADDR {0xE0100FFF} \
|
|
CONFIG.PCW_SDIO1_BASEADDR {0xE0101000} \
|
|
CONFIG.PCW_SDIO1_HIGHADDR {0xE0101FFF} \
|
|
CONFIG.PCW_SDIO_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_SDIO_PERIPHERAL_DIVISOR0 {10} \
|
|
CONFIG.PCW_SDIO_PERIPHERAL_FREQMHZ {100} \
|
|
CONFIG.PCW_SDIO_PERIPHERAL_VALID {1} \
|
|
CONFIG.PCW_SINGLE_QSPI_DATA_MODE {x4} \
|
|
CONFIG.PCW_SMC_CYCLE_T0 {NA} \
|
|
CONFIG.PCW_SMC_CYCLE_T1 {NA} \
|
|
CONFIG.PCW_SMC_CYCLE_T2 {NA} \
|
|
CONFIG.PCW_SMC_CYCLE_T3 {NA} \
|
|
CONFIG.PCW_SMC_CYCLE_T4 {NA} \
|
|
CONFIG.PCW_SMC_CYCLE_T5 {NA} \
|
|
CONFIG.PCW_SMC_CYCLE_T6 {NA} \
|
|
CONFIG.PCW_SMC_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_SMC_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_SMC_PERIPHERAL_FREQMHZ {100} \
|
|
CONFIG.PCW_SMC_PERIPHERAL_VALID {0} \
|
|
CONFIG.PCW_SPI0_BASEADDR {0xE0006000} \
|
|
CONFIG.PCW_SPI0_GRP_SS0_ENABLE {1} \
|
|
CONFIG.PCW_SPI0_GRP_SS0_IO {EMIO} \
|
|
CONFIG.PCW_SPI0_GRP_SS1_ENABLE {1} \
|
|
CONFIG.PCW_SPI0_GRP_SS1_IO {EMIO} \
|
|
CONFIG.PCW_SPI0_GRP_SS2_ENABLE {1} \
|
|
CONFIG.PCW_SPI0_GRP_SS2_IO {EMIO} \
|
|
CONFIG.PCW_SPI0_HIGHADDR {0xE0006FFF} \
|
|
CONFIG.PCW_SPI0_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_SPI0_SPI0_IO {EMIO} \
|
|
CONFIG.PCW_SPI1_BASEADDR {0xE0007000} \
|
|
CONFIG.PCW_SPI1_GRP_SS0_ENABLE {1} \
|
|
CONFIG.PCW_SPI1_GRP_SS0_IO {EMIO} \
|
|
CONFIG.PCW_SPI1_GRP_SS1_ENABLE {1} \
|
|
CONFIG.PCW_SPI1_GRP_SS1_IO {EMIO} \
|
|
CONFIG.PCW_SPI1_GRP_SS2_ENABLE {1} \
|
|
CONFIG.PCW_SPI1_GRP_SS2_IO {EMIO} \
|
|
CONFIG.PCW_SPI1_HIGHADDR {0xE0007FFF} \
|
|
CONFIG.PCW_SPI1_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_SPI1_SPI1_IO {EMIO} \
|
|
CONFIG.PCW_SPI_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_SPI_PERIPHERAL_DIVISOR0 {6} \
|
|
CONFIG.PCW_SPI_PERIPHERAL_FREQMHZ {166.666666} \
|
|
CONFIG.PCW_SPI_PERIPHERAL_VALID {1} \
|
|
CONFIG.PCW_S_AXI_ACP_ARUSER_VAL {31} \
|
|
CONFIG.PCW_S_AXI_ACP_AWUSER_VAL {31} \
|
|
CONFIG.PCW_S_AXI_ACP_ID_WIDTH {3} \
|
|
CONFIG.PCW_S_AXI_GP0_ID_WIDTH {6} \
|
|
CONFIG.PCW_S_AXI_GP1_ID_WIDTH {6} \
|
|
CONFIG.PCW_S_AXI_HP0_DATA_WIDTH {64} \
|
|
CONFIG.PCW_S_AXI_HP0_ID_WIDTH {6} \
|
|
CONFIG.PCW_S_AXI_HP1_DATA_WIDTH {64} \
|
|
CONFIG.PCW_S_AXI_HP1_ID_WIDTH {6} \
|
|
CONFIG.PCW_S_AXI_HP2_DATA_WIDTH {64} \
|
|
CONFIG.PCW_S_AXI_HP2_ID_WIDTH {6} \
|
|
CONFIG.PCW_S_AXI_HP3_DATA_WIDTH {64} \
|
|
CONFIG.PCW_S_AXI_HP3_ID_WIDTH {6} \
|
|
CONFIG.PCW_TPIU_PERIPHERAL_CLKSRC {External} \
|
|
CONFIG.PCW_TPIU_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_TPIU_PERIPHERAL_FREQMHZ {200} \
|
|
CONFIG.PCW_TRACE_BUFFER_CLOCK_DELAY {12} \
|
|
CONFIG.PCW_TRACE_BUFFER_FIFO_SIZE {128} \
|
|
CONFIG.PCW_TRACE_GRP_16BIT_ENABLE {0} \
|
|
CONFIG.PCW_TRACE_GRP_2BIT_ENABLE {0} \
|
|
CONFIG.PCW_TRACE_GRP_32BIT_ENABLE {0} \
|
|
CONFIG.PCW_TRACE_GRP_4BIT_ENABLE {0} \
|
|
CONFIG.PCW_TRACE_GRP_8BIT_ENABLE {0} \
|
|
CONFIG.PCW_TRACE_INTERNAL_WIDTH {2} \
|
|
CONFIG.PCW_TRACE_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_TRACE_PIPELINE_WIDTH {8} \
|
|
CONFIG.PCW_TTC0_BASEADDR {0xE0104000} \
|
|
CONFIG.PCW_TTC0_CLK0_PERIPHERAL_CLKSRC {CPU_1X} \
|
|
CONFIG.PCW_TTC0_CLK0_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_TTC0_CLK0_PERIPHERAL_FREQMHZ {133.333333} \
|
|
CONFIG.PCW_TTC0_CLK1_PERIPHERAL_CLKSRC {CPU_1X} \
|
|
CONFIG.PCW_TTC0_CLK1_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_TTC0_CLK1_PERIPHERAL_FREQMHZ {133.333333} \
|
|
CONFIG.PCW_TTC0_CLK2_PERIPHERAL_CLKSRC {CPU_1X} \
|
|
CONFIG.PCW_TTC0_CLK2_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_TTC0_CLK2_PERIPHERAL_FREQMHZ {133.333333} \
|
|
CONFIG.PCW_TTC0_HIGHADDR {0xE0104fff} \
|
|
CONFIG.PCW_TTC0_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_TTC1_BASEADDR {0xE0105000} \
|
|
CONFIG.PCW_TTC1_CLK0_PERIPHERAL_CLKSRC {CPU_1X} \
|
|
CONFIG.PCW_TTC1_CLK0_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_TTC1_CLK0_PERIPHERAL_FREQMHZ {133.333333} \
|
|
CONFIG.PCW_TTC1_CLK1_PERIPHERAL_CLKSRC {CPU_1X} \
|
|
CONFIG.PCW_TTC1_CLK1_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_TTC1_CLK1_PERIPHERAL_FREQMHZ {133.333333} \
|
|
CONFIG.PCW_TTC1_CLK2_PERIPHERAL_CLKSRC {CPU_1X} \
|
|
CONFIG.PCW_TTC1_CLK2_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_TTC1_CLK2_PERIPHERAL_FREQMHZ {133.333333} \
|
|
CONFIG.PCW_TTC1_HIGHADDR {0xE0105fff} \
|
|
CONFIG.PCW_TTC1_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_TTC_PERIPHERAL_FREQMHZ {50} \
|
|
CONFIG.PCW_UART0_BASEADDR {0xE0000000} \
|
|
CONFIG.PCW_UART0_BAUD_RATE {115200} \
|
|
CONFIG.PCW_UART0_GRP_FULL_ENABLE {0} \
|
|
CONFIG.PCW_UART0_HIGHADDR {0xE0000FFF} \
|
|
CONFIG.PCW_UART0_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_UART0_UART0_IO {MIO 14 .. 15} \
|
|
CONFIG.PCW_UART1_BASEADDR {0xE0001000} \
|
|
CONFIG.PCW_UART1_BAUD_RATE {115200} \
|
|
CONFIG.PCW_UART1_GRP_FULL_ENABLE {0} \
|
|
CONFIG.PCW_UART1_HIGHADDR {0xE0001FFF} \
|
|
CONFIG.PCW_UART1_PERIPHERAL_ENABLE {1} \
|
|
CONFIG.PCW_UART1_UART1_IO {EMIO} \
|
|
CONFIG.PCW_UART_PERIPHERAL_CLKSRC {IO PLL} \
|
|
CONFIG.PCW_UART_PERIPHERAL_DIVISOR0 {10} \
|
|
CONFIG.PCW_UART_PERIPHERAL_FREQMHZ {100} \
|
|
CONFIG.PCW_UART_PERIPHERAL_VALID {1} \
|
|
CONFIG.PCW_UIPARAM_ACT_DDR_FREQ_MHZ {266.666687} \
|
|
CONFIG.PCW_UIPARAM_DDR_ADV_ENABLE {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_AL {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_BANK_ADDR_COUNT {3} \
|
|
CONFIG.PCW_UIPARAM_DDR_BL {8} \
|
|
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY0 {0.25} \
|
|
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY1 {0.25} \
|
|
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY2 {0.25} \
|
|
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY3 {0.25} \
|
|
CONFIG.PCW_UIPARAM_DDR_BUS_WIDTH {32 Bit} \
|
|
CONFIG.PCW_UIPARAM_DDR_CL {7} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PACKAGE_LENGTH {80.4535} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PACKAGE_LENGTH {80.4535} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PACKAGE_LENGTH {80.4535} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PACKAGE_LENGTH {80.4535} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_CLOCK_STOP_EN {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_COL_ADDR_COUNT {10} \
|
|
CONFIG.PCW_UIPARAM_DDR_CWL {6} \
|
|
CONFIG.PCW_UIPARAM_DDR_DEVICE_CAPACITY {4096 MBits} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_0_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_0_PACKAGE_LENGTH {105.056} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_0_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_1_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_1_PACKAGE_LENGTH {66.904} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_1_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_2_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_2_PACKAGE_LENGTH {89.1715} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_2_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_3_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_3_PACKAGE_LENGTH {113.63} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_3_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_0 {0.0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_1 {0.0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_2 {0.0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_3 {0.0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_0_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_0_PACKAGE_LENGTH {98.503} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_0_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_1_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_1_PACKAGE_LENGTH {68.5855} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_1_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_2_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_2_PACKAGE_LENGTH {90.295} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_2_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_3_LENGTH_MM {0} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_3_PACKAGE_LENGTH {103.977} \
|
|
CONFIG.PCW_UIPARAM_DDR_DQ_3_PROPOGATION_DELAY {160} \
|
|
CONFIG.PCW_UIPARAM_DDR_DRAM_WIDTH {16 Bits} \
|
|
CONFIG.PCW_UIPARAM_DDR_ECC {Disabled} \
|
|
CONFIG.PCW_UIPARAM_DDR_ENABLE {1} \
|
|
CONFIG.PCW_UIPARAM_DDR_FREQ_MHZ {266.6666666} \
|
|
CONFIG.PCW_UIPARAM_DDR_HIGH_TEMP {Normal (0-85)} \
|
|
CONFIG.PCW_UIPARAM_DDR_MEMORY_TYPE {DDR 3} \
|
|
CONFIG.PCW_UIPARAM_DDR_PARTNO {MT41K256M16 RE-15E} \
|
|
CONFIG.PCW_UIPARAM_DDR_ROW_ADDR_COUNT {15} \
|
|
CONFIG.PCW_UIPARAM_DDR_SPEED_BIN {DDR3_1066F} \
|
|
CONFIG.PCW_UIPARAM_DDR_TRAIN_DATA_EYE {1} \
|
|
CONFIG.PCW_UIPARAM_DDR_TRAIN_READ_GATE {1} \
|
|
CONFIG.PCW_UIPARAM_DDR_TRAIN_WRITE_LEVEL {1} \
|
|
CONFIG.PCW_UIPARAM_DDR_T_FAW {45.0} \
|
|
CONFIG.PCW_UIPARAM_DDR_T_RAS_MIN {36.0} \
|
|
CONFIG.PCW_UIPARAM_DDR_T_RC {49.5} \
|
|
CONFIG.PCW_UIPARAM_DDR_T_RCD {7} \
|
|
CONFIG.PCW_UIPARAM_DDR_T_RP {7} \
|
|
CONFIG.PCW_UIPARAM_DDR_USE_INTERNAL_VREF {1} \
|
|
CONFIG.PCW_UIPARAM_GENERATE_SUMMARY {NA} \
|
|
CONFIG.PCW_USB0_BASEADDR {0xE0102000} \
|
|
CONFIG.PCW_USB0_HIGHADDR {0xE0102fff} \
|
|
CONFIG.PCW_USB0_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_USB0_PERIPHERAL_FREQMHZ {60} \
|
|
CONFIG.PCW_USB0_RESET_ENABLE {0} \
|
|
CONFIG.PCW_USB1_BASEADDR {0xE0103000} \
|
|
CONFIG.PCW_USB1_HIGHADDR {0xE0103fff} \
|
|
CONFIG.PCW_USB1_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_USB1_PERIPHERAL_FREQMHZ {60} \
|
|
CONFIG.PCW_USB1_RESET_ENABLE {0} \
|
|
CONFIG.PCW_USB_RESET_ENABLE {0} \
|
|
CONFIG.PCW_USB_RESET_POLARITY {Active Low} \
|
|
CONFIG.PCW_USE_AXI_FABRIC_IDLE {0} \
|
|
CONFIG.PCW_USE_AXI_NONSECURE {0} \
|
|
CONFIG.PCW_USE_CORESIGHT {0} \
|
|
CONFIG.PCW_USE_CROSS_TRIGGER {0} \
|
|
CONFIG.PCW_USE_CR_FABRIC {1} \
|
|
CONFIG.PCW_USE_DDR_BYPASS {0} \
|
|
CONFIG.PCW_USE_DEBUG {0} \
|
|
CONFIG.PCW_USE_DEFAULT_ACP_USER_VAL {0} \
|
|
CONFIG.PCW_USE_DMA0 {0} \
|
|
CONFIG.PCW_USE_DMA1 {0} \
|
|
CONFIG.PCW_USE_DMA2 {0} \
|
|
CONFIG.PCW_USE_DMA3 {0} \
|
|
CONFIG.PCW_USE_EXPANDED_IOP {0} \
|
|
CONFIG.PCW_USE_EXPANDED_PS_SLCR_REGISTERS {0} \
|
|
CONFIG.PCW_USE_FABRIC_INTERRUPT {1} \
|
|
CONFIG.PCW_USE_HIGH_OCM {0} \
|
|
CONFIG.PCW_USE_M_AXI_GP0 {0} \
|
|
CONFIG.PCW_USE_M_AXI_GP1 {1} \
|
|
CONFIG.PCW_USE_PROC_EVENT_BUS {0} \
|
|
CONFIG.PCW_USE_PS_SLCR_REGISTERS {0} \
|
|
CONFIG.PCW_USE_S_AXI_ACP {0} \
|
|
CONFIG.PCW_USE_S_AXI_GP0 {0} \
|
|
CONFIG.PCW_USE_S_AXI_GP1 {0} \
|
|
CONFIG.PCW_USE_S_AXI_HP0 {1} \
|
|
CONFIG.PCW_USE_S_AXI_HP1 {1} \
|
|
CONFIG.PCW_USE_S_AXI_HP2 {0} \
|
|
CONFIG.PCW_USE_S_AXI_HP3 {0} \
|
|
CONFIG.PCW_USE_TRACE {0} \
|
|
CONFIG.PCW_USE_TRACE_DATA_EDGE_DETECTOR {0} \
|
|
CONFIG.PCW_VALUE_SILVERSION {3} \
|
|
CONFIG.PCW_WDT_PERIPHERAL_CLKSRC {CPU_1X} \
|
|
CONFIG.PCW_WDT_PERIPHERAL_DIVISOR0 {1} \
|
|
CONFIG.PCW_WDT_PERIPHERAL_ENABLE {0} \
|
|
CONFIG.PCW_WDT_PERIPHERAL_FREQMHZ {133.333333} \
|
|
] $processing_system7_0
|
|
|
|
# Create instance: ps7_0_axi_periph, and set properties
|
|
set ps7_0_axi_periph [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 ps7_0_axi_periph ]
|
|
set_property -dict [ list \
|
|
CONFIG.NUM_MI {3} \
|
|
] $ps7_0_axi_periph
|
|
|
|
# Create instance: xlconcat_0, and set properties
|
|
set xlconcat_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 xlconcat_0 ]
|
|
set_property -dict [ list \
|
|
CONFIG.NUM_PORTS {2} \
|
|
] $xlconcat_0
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net S_AXIS_TS2_1 [get_bd_intf_ports S_AXIS_TS2] [get_bd_intf_pins axis_data_fifo_1/S_AXIS]
|
|
connect_bd_intf_net -intf_net axi_dma_0_M_AXI_S2MM [get_bd_intf_pins axi_dma_0/M_AXI_S2MM] [get_bd_intf_pins axi_mem_intercon/S00_AXI]
|
|
connect_bd_intf_net -intf_net axi_dma_1_M_AXI_S2MM [get_bd_intf_pins axi_dma_1/M_AXI_S2MM] [get_bd_intf_pins axi_mem_intercon_1/S00_AXI]
|
|
connect_bd_intf_net -intf_net axi_mem_intercon_1_M00_AXI [get_bd_intf_pins axi_mem_intercon_1/M00_AXI] [get_bd_intf_pins processing_system7_0/S_AXI_HP1]
|
|
connect_bd_intf_net -intf_net axi_mem_intercon_M00_AXI [get_bd_intf_pins axi_mem_intercon/M00_AXI] [get_bd_intf_pins processing_system7_0/S_AXI_HP0]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_0_M_AXIS [get_bd_intf_pins axi_dma_0/S_AXIS_S2MM] [get_bd_intf_pins axis_data_fifo_0/M_AXIS]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_1_M_AXIS [get_bd_intf_pins axi_dma_1/S_AXIS_S2MM] [get_bd_intf_pins axis_data_fifo_1/M_AXIS]
|
|
connect_bd_intf_net -intf_net processing_system7_0_DDR [get_bd_intf_ports DDR] [get_bd_intf_pins processing_system7_0/DDR]
|
|
connect_bd_intf_net -intf_net processing_system7_0_FIXED_IO [get_bd_intf_ports FIXED_IO] [get_bd_intf_pins processing_system7_0/FIXED_IO]
|
|
connect_bd_intf_net -intf_net processing_system7_0_M_AXI_GP1 [get_bd_intf_pins processing_system7_0/M_AXI_GP1] [get_bd_intf_pins ps7_0_axi_periph/S00_AXI]
|
|
connect_bd_intf_net -intf_net ps7_0_axi_periph_M00_AXI [get_bd_intf_pins axi_dma_0/S_AXI_LITE] [get_bd_intf_pins ps7_0_axi_periph/M00_AXI]
|
|
connect_bd_intf_net -intf_net ps7_0_axi_periph_M01_AXI [get_bd_intf_pins axi_dma_1/S_AXI_LITE] [get_bd_intf_pins ps7_0_axi_periph/M01_AXI]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net GPIO_EMIO_gpio_i_1 [get_bd_ports GPIO_EMIO_gpio_i] [get_bd_pins processing_system7_0/GPIO_I]
|
|
connect_bd_net -net I2C0_SCL_I_1 [get_bd_ports I2C0_SCL_I] [get_bd_pins processing_system7_0/I2C0_SCL_I]
|
|
connect_bd_net -net I2C0_SDA_I_1 [get_bd_ports I2C0_SDA_I] [get_bd_pins processing_system7_0/I2C0_SDA_I]
|
|
connect_bd_net -net I2C1_SCL_I_1 [get_bd_ports I2C1_SCL_I] [get_bd_pins processing_system7_0/I2C1_SCL_I]
|
|
connect_bd_net -net I2C1_SDA_I_1 [get_bd_ports I2C1_SDA_I] [get_bd_pins processing_system7_0/I2C1_SDA_I]
|
|
connect_bd_net -net SPI0_MISO_I_1 [get_bd_ports SPI0_MISO_I] [get_bd_pins processing_system7_0/SPI0_MISO_I]
|
|
connect_bd_net -net SPI1_MISO_I_1 [get_bd_ports SPI1_MISO_I] [get_bd_pins processing_system7_0/SPI1_MISO_I]
|
|
connect_bd_net -net UART1_RX_I_1 [get_bd_ports UART1_RX_I] [get_bd_pins processing_system7_0/UART1_RX]
|
|
connect_bd_net -net axi_dma_0_s2mm_introut [get_bd_pins axi_dma_0/s2mm_introut] [get_bd_pins xlconcat_0/In0]
|
|
connect_bd_net -net axi_dma_1_s2mm_introut [get_bd_pins axi_dma_1/s2mm_introut] [get_bd_pins xlconcat_0/In1]
|
|
connect_bd_net -net axis_data_fifo_0_axis_data_count [get_bd_pins axis_data_fifo_0/axis_data_count] [get_bd_pins ila_1/probe4]
|
|
connect_bd_net -net axis_data_fifo_0_axis_rd_data_count [get_bd_pins axis_data_fifo_0/axis_rd_data_count] [get_bd_pins ila_1/probe6]
|
|
connect_bd_net -net axis_data_fifo_0_axis_wr_data_count [get_bd_pins axis_data_fifo_0/axis_wr_data_count] [get_bd_pins ila_1/probe5]
|
|
connect_bd_net -net axis_data_fifo_0_s_axis_tready [get_bd_ports s_axis_tready_0] [get_bd_pins axis_data_fifo_0/s_axis_tready] [get_bd_pins ila_1/probe3]
|
|
connect_bd_net -net proc_sys_reset_0_interconnect_aresetn [get_bd_pins axi_mem_intercon/ARESETN] [get_bd_pins axi_mem_intercon_1/ARESETN] [get_bd_pins proc_sys_reset_0/interconnect_aresetn] [get_bd_pins ps7_0_axi_periph/ARESETN]
|
|
connect_bd_net -net proc_sys_reset_0_peripheral_aresetn [get_bd_pins axi_dma_0/axi_resetn] [get_bd_pins axi_dma_1/axi_resetn] [get_bd_pins axi_mem_intercon/M00_ARESETN] [get_bd_pins axi_mem_intercon/S00_ARESETN] [get_bd_pins axi_mem_intercon_1/M00_ARESETN] [get_bd_pins axi_mem_intercon_1/S00_ARESETN] [get_bd_pins axis_data_fifo_0/s_axis_aresetn] [get_bd_pins axis_data_fifo_1/s_axis_aresetn] [get_bd_pins proc_sys_reset_0/peripheral_aresetn] [get_bd_pins ps7_0_axi_periph/M00_ARESETN] [get_bd_pins ps7_0_axi_periph/M01_ARESETN] [get_bd_pins ps7_0_axi_periph/M02_ARESETN] [get_bd_pins ps7_0_axi_periph/S00_ARESETN]
|
|
connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_ports FCLK_CLK0] [get_bd_pins axi_dma_0/m_axi_s2mm_aclk] [get_bd_pins axi_dma_0/s_axi_lite_aclk] [get_bd_pins axi_dma_1/m_axi_s2mm_aclk] [get_bd_pins axi_dma_1/s_axi_lite_aclk] [get_bd_pins axi_mem_intercon/ACLK] [get_bd_pins axi_mem_intercon/M00_ACLK] [get_bd_pins axi_mem_intercon/S00_ACLK] [get_bd_pins axi_mem_intercon_1/ACLK] [get_bd_pins axi_mem_intercon_1/M00_ACLK] [get_bd_pins axi_mem_intercon_1/S00_ACLK] [get_bd_pins axis_data_fifo_0/s_axis_aclk] [get_bd_pins axis_data_fifo_1/s_axis_aclk] [get_bd_pins ila_1/clk] [get_bd_pins proc_sys_reset_0/slowest_sync_clk] [get_bd_pins processing_system7_0/FCLK_CLK0] [get_bd_pins processing_system7_0/M_AXI_GP1_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP0_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP1_ACLK] [get_bd_pins ps7_0_axi_periph/ACLK] [get_bd_pins ps7_0_axi_periph/M00_ACLK] [get_bd_pins ps7_0_axi_periph/M01_ACLK] [get_bd_pins ps7_0_axi_periph/M02_ACLK] [get_bd_pins ps7_0_axi_periph/S00_ACLK]
|
|
connect_bd_net -net processing_system7_0_FCLK_RESET0_N [get_bd_ports FCLK_RESET0_N] [get_bd_pins proc_sys_reset_0/ext_reset_in] [get_bd_pins processing_system7_0/FCLK_RESET0_N]
|
|
connect_bd_net -net processing_system7_0_GPIO_O [get_bd_ports GPIO_EMIO_gpio_o] [get_bd_pins processing_system7_0/GPIO_O]
|
|
connect_bd_net -net processing_system7_0_GPIO_T [get_bd_ports GPIO_EMIO_gpio_t] [get_bd_pins processing_system7_0/GPIO_T]
|
|
connect_bd_net -net processing_system7_0_I2C0_SCL_O [get_bd_ports I2C0_SCL_O] [get_bd_pins processing_system7_0/I2C0_SCL_O]
|
|
connect_bd_net -net processing_system7_0_I2C0_SCL_T [get_bd_ports I2C0_SCL_T] [get_bd_pins processing_system7_0/I2C0_SCL_T]
|
|
connect_bd_net -net processing_system7_0_I2C0_SDA_O [get_bd_ports I2C0_SDA_O] [get_bd_pins processing_system7_0/I2C0_SDA_O]
|
|
connect_bd_net -net processing_system7_0_I2C0_SDA_T [get_bd_ports I2C0_SDA_T] [get_bd_pins processing_system7_0/I2C0_SDA_T]
|
|
connect_bd_net -net processing_system7_0_I2C1_SCL_O [get_bd_ports I2C1_SCL_O] [get_bd_pins processing_system7_0/I2C1_SCL_O]
|
|
connect_bd_net -net processing_system7_0_I2C1_SCL_T [get_bd_ports I2C1_SCL_T] [get_bd_pins processing_system7_0/I2C1_SCL_T]
|
|
connect_bd_net -net processing_system7_0_I2C1_SDA_O [get_bd_ports I2C1_SDA_O] [get_bd_pins processing_system7_0/I2C1_SDA_O]
|
|
connect_bd_net -net processing_system7_0_I2C1_SDA_T [get_bd_ports I2C1_SDA_T] [get_bd_pins processing_system7_0/I2C1_SDA_T]
|
|
connect_bd_net -net processing_system7_0_SPI0_MOSI_O [get_bd_ports SPI0_MOSI_O] [get_bd_pins processing_system7_0/SPI0_MOSI_O]
|
|
connect_bd_net -net processing_system7_0_SPI0_SCLK_O [get_bd_ports SPI0_SCLK_O] [get_bd_pins processing_system7_0/SPI0_SCLK_O]
|
|
connect_bd_net -net processing_system7_0_SPI0_SS_O [get_bd_ports SPI0_SS_O] [get_bd_pins processing_system7_0/SPI0_SS_O]
|
|
connect_bd_net -net processing_system7_0_SPI1_MOSI_O [get_bd_ports SPI1_MOSI_O] [get_bd_pins processing_system7_0/SPI1_MOSI_O]
|
|
connect_bd_net -net processing_system7_0_SPI1_SCLK_O [get_bd_ports SPI1_SCLK_O] [get_bd_pins processing_system7_0/SPI1_SCLK_O]
|
|
connect_bd_net -net processing_system7_0_SPI1_SS_O [get_bd_ports SPI1_SS_O] [get_bd_pins processing_system7_0/SPI1_SS_O]
|
|
connect_bd_net -net processing_system7_0_UART1_TX [get_bd_ports UART1_TX_O] [get_bd_pins processing_system7_0/UART1_TX]
|
|
connect_bd_net -net s_axis_tdata_0_1 [get_bd_ports s_axis_tdata_0] [get_bd_pins axis_data_fifo_0/s_axis_tdata] [get_bd_pins ila_1/probe0]
|
|
connect_bd_net -net s_axis_tlast_0_1 [get_bd_ports s_axis_tlast_0] [get_bd_pins axis_data_fifo_0/s_axis_tlast] [get_bd_pins ila_1/probe2]
|
|
connect_bd_net -net s_axis_tvalid_0_1 [get_bd_ports s_axis_tvalid_0] [get_bd_pins axis_data_fifo_0/s_axis_tvalid] [get_bd_pins ila_1/probe1]
|
|
connect_bd_net -net xlconcat_0_dout [get_bd_pins processing_system7_0/IRQ_F2P] [get_bd_pins xlconcat_0/dout]
|
|
|
|
# Create address segments
|
|
create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces axi_dma_0/Data_S2MM] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM] SEG_processing_system7_0_HP0_DDR_LOWOCM
|
|
create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces axi_dma_1/Data_S2MM] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
|
|
create_bd_addr_seg -range 0x00010000 -offset 0x80400000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_dma_0/S_AXI_LITE/Reg] SEG_axi_dma_0_Reg
|
|
create_bd_addr_seg -range 0x00010000 -offset 0x80410000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_dma_1/S_AXI_LITE/Reg] SEG_axi_dma_1_Reg
|
|
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
|
|
save_bd_design
|
|
}
|
|
# End of create_root_design()
|
|
|
|
|
|
##################################################################
|
|
# MAIN FLOW
|
|
##################################################################
|
|
|
|
create_root_design ""
|
|
|
|
|