新增：V1.1 硬件功率校准

src/atsc_app/inc/config.h

@@ -272,7 +272,7 @@
 
 #define USE_NETWORK_DNS         0   // 是否配置dns
 #define USE_NEW_POWER_CFG       1   // HMC472 + ADRV9009 power allocation
-#define USE_FREQ_CHANGE_RESET_PWR 1 // 切换频点后是否先将输出功率降到-25dB
+#define USE_FREQ_CHANGE_RESET_PWR 0 // 切换频点后是否先将输出功率降到-25dB
 
 
 #if USE_BIG_LCD

src/atsc_app/inc/eeprom.h

@@ -38,6 +38,7 @@ typedef enum
 	EEPROM_ADRV9009_ATT_L,
 	EEPROM_ADRV9009_ORX_MANU_GAIN,
 	EEPROM_SPEC_ENABLE,
+	EEPROM_HARDWARE_VERSION,
 
 
     EEPROM_CHANNEL_ADDR = 0x50,   //RF 相关
@@ -188,6 +189,8 @@ typedef enum
     //工厂菜单当前WK为0x220,  工厂菜单power定义到0x300,中间预留部分空间
     EEPROM_CH1_POWER_ADDR = 0x300,  //约60多字节
     EEPROM_CH2_POWER_ADDR = 0X400,  //1.42(3X+)功率控制字
+    // V1.1独立频点WE表；0x500~0x5A7，未配置项回退到V1.0表
+    EEPROM_CH_POWER_V1_1_ADDR = 0x500,
 
     EEPROM_PSTS_TS_EDIT = 0x600,    //开关
     EEPROM_PSTS_TSIDH,              //tsid

src/atsc_app/inc/lcd_task.h

@@ -106,6 +106,15 @@
 #define WE_POWER_MIN                0
 #define WE_POWER_MAX                500
 
+typedef enum
+{
+    HARDWARE_VERSION_V1_0 = 0,
+    HARDWARE_VERSION_V1_1,
+    HARDWARE_VERSION_END
+} HARDWARE_VERSION;
+
+#define DEFAULT_HARDWARE_VERSION    HARDWARE_VERSION_V1_1
+
 #define OCXO_MAX                    10     //单位0.1hz system菜单
 #define OCXO_UNIT                   106    //保存时的放大倍数
 #define LOG_RSSI_ADJUST             107    //读取tuner的rssi修正值
@@ -372,6 +381,7 @@ typedef struct
 	uint8 agc_att;
 	uint16 adrv9009_att;
 	uint8 orx_manu_gain;
+	uint8 hardware_version;
 }S_SYSTEM_PARA,*PS_SYSTEM_PARA;
 
 typedef struct

src/atsc_app/inc/web_server.h

@@ -225,6 +225,7 @@ typedef struct
     uint8  agc_att;
 	uint16 adrv9009_att;
 	uint8  orx_manu_gain;
+	uint8  hardware_version;
 }S_CGI_SET,*PS_CGI_SET;
 
 typedef struct